649214

Silvercrest SKM 550 B1 - IAN 274393 Manual

26
Zoom out
Zoom in
Previous page
1/272
Next page
■ 22 
│
 GB
│
IE
SKM 550 B1
After you have finished
using your appliance
1) Switch the appliance off using the rotary
switch ..
2) Set the rotary switch . to P and hold it in
this position until the drive unit 6 comes to a
standstill (Image B).
3) Remove the lid.
4) Press down the release button ! and move
the pivot arm 0 into operating position 4.
5) Remove the attachment you have been using
from the drive unit 6.
6) Remove the mixing bowl .
7) Clean the appliance (see section “Cleaning
and care”).
Working with
the continuous shredder
WARNING! RISK OF INJURY!
► To avoid personal injury and damage to the
appliance, never insert or place your hands
or any foreign objects into the feed tube.
► Always use the pusher and no other implement
or body part to push ingredients into the
appliance. Danger of injury due to rotating
parts!
► Switch from one accessory to another only
when the drive unit 6 is at a complete stand-
still! After being switched off, the drive unit 6
will continue to run for a short time.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
NOTE
► The appliance may only be used when the
drive hubs not being utilised are fitted with
their protective covers.
► Make sure that neither the kneading hooks ,
the whisk , or the beater are attached
to the pivot arm 0.
Proceed as follows to prepare the appliance for
operation using the continuous shredder :
1) Press down the release button ! and move
the pivot arm 0 into operating position 4
(see the section “Operating positions”).
2) Set the mixing bowl into place. The base
of the mixing bowl must click into the re-
cesses 1 on the appliance.
3) Press down the release button ! and move
the pivot arm 0 into operating position 2.
4) Remove the protective cover from the drive
for the continuous shredder (Image C).
5) Insert the continuous shredder into the
hub socket (aligning the marking “
” on the
continuous shredder with the marking “ ”
on the pivoting arm 0).
Turn it in an anti-clockwise direction until the
continuous shredder clicks firmly in place
(and the marking “ ” on the continuous shred-
der is aligned with the marking “ ” on
the pivoting arm 0).
6) Set the drive shaft into place.
7) Depending on the task you want to perform,
place the cutting -, shredding or grating
disc onto the drive shaft of the continous
shredder .
8) Place the lid with the pusher 3 onto the con-
tinuous shredder (so that the marking “
”
on the lid 3 is lined up with the marking “ ”
on the continuous shredder ) and lock the
lid in (marking “ ” on the lid 3 is lined
up with the marking “ ” on the continuous
shredder ).
9) Turn the rotary switch . to the required setting.
NOTE
► Do not press too much food into the continuous
shredder . Take note of the table in the sec-
tion "Recommended filling levels".
10) Add the ingredients through the opening in the
lid with the help of the pusher.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 550 B1 - IAN 274393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 550 B1 - IAN 274393 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info