649214

Silvercrest SKM 550 B1 - IAN 274393 Manual

25
Zoom out
Zoom in
Previous page
1/272
Next page
GB
│
IE 
│
 21 ■
SKM 550 B1
Working with the kneading
hook, beater and whisk
WARNING! RISK OF INJURY!
► Under no circumstances should you place
your hands or fingers in the mixing bowl 
during operation! Danger of injury due to
rotating parts!
► Switch from one accessory to another only
when the drive unit 6 is at a complete
standstill! After being switched off, the drive
unit 6 will continue to run for a short time.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
NOTE
► The appliance may only be used when the
drive hubs not being used are fitted with their
protective covers.
Proceed as follows to prepare the appliance for
operation using the kneading hook , beater
and whisk :
1) Press down the release button ! and move
the pivoting arm 0 into operating position 4
(see the section “Operating positions”) (Image
A).
2) Set the mixing bowl into place. Check that the
base of the mixing bowl is inserted fully into
the recesses 1 provided for it on the blender.
3) Press down the release button ! and move
the pivoting arm 0 into operating position 1
(Image A).
4) Set the rotary switch . to P and hold it in this
position until the drive unit 6 settles in its “Park”
position (Image B). If the drive unit 6 doesn’t
move, it is already in its park position (Fig. 2).
5) Press down the release button ! and move
the pivoting arm 0 into operating position 4
(Image A).
6) If you want to use the kneading hook , insert
the dough deflector into the drive unit 6
(Image D). Ensure that the hole through which
the kneading hook is inserted is lying over
the mounting hole on the drive unit 6.
7) Depending on the task to be performed, insert
the kneading hook , beater or whisk so
that they firmly click firmly into the drive unit 6.
8) Add the ingredients you wish to process into
the mixing bowl .
NOTE
► While kneading and/or mixing, please note
that the dough in the mixing bowl will in-
crease in volume or will be pressed upwards
by the tool. Take note of the table in the sec-
tion "Recommended filling quantities".
9) Press down the release button ! and move
the pivoting arm 0 down into operating
position 1 (Image A).
10) Slide the lid onto the mixing bowl so that the
catches on the pivoting arm 0 click into place.
11) Turn the rotary switch . to the required setting.
Refilling with ingredients
■ Add the ingredients through the hole in the lid
during operation.
Or:
1) Switch the appliance off using the rotary
switch ..
2) Set the rotary switch . to P and hold it in
this position until the drive unit 6 comes to a
standstill (Image B).
3) Remove the lid.
4) Press down the release button ! and move
the pivoting arm 0 into operating position 5.
5) Add the ingredients.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 550 B1 - IAN 274393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 550 B1 - IAN 274393 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info