600790
54
Zoom out
Zoom in
Previous page
1/62
Next page
52
GB
8. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
~ Pull the mains plug14 out the wall
socket before cleaning the food proces-
sor.
~ The motor block15, the power cable
and the mains plug14 must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water should
be sufficiently clear that you can see the
blades4,5 and8 easily.
WARNING! Risk of material damage!
Do not use any astringent or abrasive clean-
ing agents.
Dismantling the device
1. Pull out the mains plug14.
2. Turn the bowl11 anti-clockwise, until
the symbol 16 points to the bottom
marking on the bowl12.
3. Hold the bowl11 tightly. Turn the lid3
anti-clockwise, until the symbol 2
points to the top marking on the
bowl10. Remove the lid.
4. Carefully remove the dough blade7,
the blade insert8 or the insert holder6
with attached slicing insert4 / grating
disk5. Remove the drive axle9.
5. Figure F: turn the insert holder6
around and hold it over a washable,
scratch-proof surface. Press the extending
edges of the slicing insert4 / grating
disk5 inwards and press it out.
How to clean properly
1. If necessary, wipe down the motor
block15 and the power cable14 with
a damp cloth. Ensure that the motor
block15 is completely dry before the
next time it is used.
2. All parts except for the motor block15
are dishwasher-safe up to 70 °C.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Some cleaning tips
Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
After processing very salty or acidic
foodstuffs, the dough blade7 / blade
insert8, the insert holder6 and the slic-
ing insert4 / grating disk5 should be
washed thoroughly and right away.
9. Storage
DANGER for children! Keep the
device out of the reach of children.
DANGER!
In order to avoid accidents, the
mains plug
14
must never be connected to a
wall socket while in storage.
Assemble the food processor for stor-
age. This allows the blade insert
8 to be
stored safely.
Select a location where neither high
temperatures nor moisture can affect the
device.
Figure G: the power cable14 can be
wound up on the cable spool in the
housing cover of the motor block15.
__RP104067_B2.book Seite 52 Montag, 3. November 2014 11:26 11
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 350 A1 - IAN 104067 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 350 A1 - IAN 104067 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info