575479

Silvercrest SKF 2300 A1 - IAN 72223 Manual

8
Zoom out
Zoom in
Previous page
1/63
Next page
- 6 -
6. Carefully replace the frying basket 3 into the
deep fryer.
7. Close the appliance lid. This must click in audibly.
8. Slide the handle locking button w downwards.
The handle now allows itself to be lowered. The
frying basket 3 is at the same time lowered into
the hot oil or fat.
Note:
The frying process can be overseen through the
viewing window 1 in the appliance lid.
Solid Cooking Fats
To avoid a spraying of the fat and that the appliance
becomes too hot, please take the following precau-
tions when using solid frying fat:
• When replacing old fat with fresh, first melt the
fresh blocks of fat slowly, under low heat, in a
separate pan. Then carefully pour the molten fat
into the deep fryer. When this has been done,
insert the power plug into a socket and switch
the deep fryer on.
• After use, store the deep fryer with the solidified
fat at room temperatures.
If the fat is too cold, it can splatter on remelting! To
avoid this, use a wooden or plastic implement to
make some holes in the re-solidified fat. Ensure that
the heating element is not damaged when doing
this.
• To melt the fat, switch the appliance on with the
on/off switch 0 and set the temperature dial 8
at 130˚C. The lamp integrated into the on/off
switch 0 comes on.
• Wait until all the fat has melted. Thereby, the
green indicator lamp 9 can, on occasion, go out
and light up again. First set the required frying
temperature when all of the fat has melted.
Timer
You can programme in a countdown of up to 60 mi-
nutes with the timer q:
• Press the button " " on the timer to switch it on.
• Press the buttons "+" and "-" to set the desired
time in minutes.
• Press on the button " " to start the countdown
of the time. The programmed time will blink twice
to indicate that the countdown of the time has
begun.
Signal tones sound on completion of the countdown.
The short-period timer q switches itself off automati-
cally.
Note:
On expiry of the countdown the heating element 5
is NOT switched off! Therefore pay heed to the signal
tone from the short-period timer q, so as to avoid
spoiling the food being fried.
Note:
When the battery is discharged, exchange it. Always
use a replacement battery of the same type. Pay
heed to the correct polarity when inserting it.
After Frying
• When the food is ready, pull the handle upwards
until the handle locking button w engages.
• Leave the frying basket 3 in this position to drip
off.
• Press the On/Off switch 0. The deep fryer is
now switched off. Remove the power plug from
the wall socket.
• When the food has dripped off, open the ap-
pliance lid by pressing the lid release button 6.
IB_72223_SKF2300A1_LB3.qxd 06.01.2012 13:25 Uhr Seite 6
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 A1 - IAN 72223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 A1 - IAN 72223 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKF 2300 A1 - IAN 72223

Silvercrest SKF 2300 A1 - IAN 72223 User Manual - German, Dutch, French - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info