793041
11
Zoom out
Zoom in
Previous page
1/176
Next page
SHSS 28 A18 GBIE
Connecting/removing the hand
element to/from the handle rod
Fig. 2 Fig. 3
1) To connect the hand element 3 to the handle
rod 0, push the tip of the hand element 3
into the opening in the hand element recess
e.
2) Then press the grip 1 of the hand element 3
into the handle rod 0 until the hand element
3 clicks firmly into place (Fig. 2).
3) To remove the hand element 3 from the
handle rod 0, press both release buttons w.
4) Then pull the hand element 3 upwards and
forwards out of the hand element recess e
(Fig. 3).
Operation
ATTENTION! PROPERTY DAMAGE!
The suction opening must always be open
and may not be blocked. Blockages lead to
overheating and damage to the motor.
Do not vacuum shag pile carpet with the floor
nozzle. The rotary brush r can get caught
in the carpet and jam!
NOTE
Make sure that the HEPA filter 5 and the
coarse filter 6 are always inserted before
using the appliance.
As soon as the suction power of the appliance
begins to diminish noticeably and the charge
indicator lamp 2 flashes blue, connect the
appliance to the mains adapter u.
Using the hand element with the
handle rod
1) Insert the hand element 3 into the hand
element recess e as described in the section
Assembly/disassembly.
2) Switch on the appliance using the On/Off
switch 8. The charge indicator lamp 2
lights up blue, the LED light t on the floor
nozzle lights up and the rotary brush r
starts rotating.
NOTE
Press the ECO button 9 to switch to the
energy-saving ECO mode. The appliance
now uses a lower suction power but can run
for longer.
Press the ECO button 9 again to work with
full suction power.
3) Guide the floor nozzle over the area to be
vacuumed. Hold the handle rod 0 so that the
floor nozzle moves smoothly over the floor.
4) Press the On/Off switch 8 when you have
finished vacuuming. The rotary brush r stops
and the charge indicator lamp 2 as well as
the LED light t switch off.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHSS 28 A1 - IAN 394516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHSS 28 A1 - IAN 394516 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info