793041

Silvercrest SHSS 28 A1 - IAN 394516 Manual

10
Zoom out
Zoom in
Previous page
1/176
Next page
SHSS 28 A1 GB│IE │ 7 ■
Before first use
■ Remove all packaging materials and protective
stickers from the appliance, especially the pro-
tective sticker on the contacts on the back of
the hand element 3.
■ Place the cradle o onto the stand until the
cradle o clicks into place.
NOTE
► The appliance batteries are not charged
upon delivery. The batteries must be charged
for 5–6 hours before using the appliance
for the first time.
Charging the appliance
NOTE
► Ensure that the appliance is switched off
before starting to charge the batteries.
■ To charge the appliance, connect the mains
adapter u to a mains socket. Plug the barrel
plug i into the charging socket p on the
underside of the cradle o. Feed the cable
through the recess on the rear of the cradle o
so that the cradle o is not resting on the cable.
■ Place the handle rod with the attached hand
element 3 onto the cradle o. The charge
indicator lamp 2 lights up red. When the
appliance is fully charged, the charge indicator
lamp 2 lights up blue.
■ Do not recharge the batteries until the suction
power of the appliance has become noticeably
weaker.
NOTE
► When the batteries are weak, the charge
indicator lamp 2 starts flashing blue. When
this happens, the appliance can be operated
for another 3 to 5 minutes.
► Once the batteries are completely discharged,
the charge indicator lamp 2 flashes red five
times and the appliance switches off.
Assembly/disassembly
Fitting the handle rod
1) Loosen the screw q at the back of the handle
rod 0 with a screwdriver in anticlockwise
direction. Pull the screw q out of the screw
hole on the handle rod 0.
2) Attach the handle rod 0 to the handle rod
bracket of the appliance. Push the handle rod
0 all the way onto the handle rod bracket
until it is firmly seated on the appliance.
(Fig. 1).
2 IN 1 TEC HN OLOGY
Fig. 1
3) Insert the screw q into the screw hole at
the back of the handle rod 0. Tighten the
screw q clockwise with a screwdriver (Fig. 1).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHSS 28 A1 - IAN 394516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHSS 28 A1 - IAN 394516 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info