656666
12
Zoom out
Zoom in
Previous page
1/86
Next page
10
GB
7. Finish ironing, set the temperature con-
troller|17 to MIN, set the steam flow
rate controller|3 to and pull out the
mains plug.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank|15 through the filling open-
ing in the water tank (under the lid|2).
7.6 Steam jet function
The steam jet function requires a high tem-
perature. Select a temperature setting be-
tween and MAX. For this purpose, the
water tank|15 must be at least one quarter
full. The steam flow rate controller|3 is locat-
ed to the left on the symbol .
Press the steam jet button while the
steam iron glides over the item of laun-
dry|4 .
Wait a few seconds before you press
the steam jet button|4 again.
NOTE:
For smoothing items of clothing that are
hanging up, you can use the steam jet
Button in a vertical position.
8. Cleaning
DANGER!
~ Pull the mains plug out of the wall socket
before you clean the steam iron.
~ Allow the device to cool down before
cleaning.
CAUTION:
~ Do not use any astringent or abrasive
cleaning agents.
Cleaning the device
For cleaning the device, use a soft,
moistened cloth.
Dirt can be removed from the sole
plate|20 using commercially available
cleaning agents for chrome, silver or
stainless steel.
Residues that have melted on can be re-
moved by heating the steam iron up to
the MAX setting and then ironing an
old cotton cloth.
Self-cleaning
CAUTION:
~ Do not put vinegar, limescale remover
or any other additives into the water
tank|15. Additives can damage the de-
vice.
If you use tap water, you should run the self-
cleaning cycle after every use. Otherwise
use the self-cleaning cycle at least twice per
month.
1. Fill the water tank|15.
2. Place the steam iron in the stand|7.
3. Connect the mains plug with the wall
socket.
4. Set the steam flow rate controller|3 to
and set the temperature control-
ler|17 to MAX.
5. Wait until the temperature control
lamp|14 goes out.
6. The switch|11 is in the position . Pick
up the steam iron together with the
stand|7.
7. While doing so, hold the device hori-
zontally over a heat-resistant household
dish.
8. Press the
|18 SELF CLEAN
button and
hold it down. Limescale residues will now
be ejected with steam and hot water from
the steam outlet holes in the sole plate|
20
.
Hold the button down until no more steam
or water emerges.
BB1$6B%XHJHOHLVHQB%ERRN6HLWH0RQWDJ$XJXVW
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBK 2400 E4 - IAN 279757 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBK 2400 E4 - IAN 279757 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info