Manual Silvercrest SDBK 2400 E4 - IAN 279757 (page 10 of 86) (English, German, Dutch, Danish, French)

656666

Zoom out

Zoom in

1/86

7. Operation

DANGER!

~ The sole plate|20 becomes very hot

during operation. During operation

touch only the handle|6 and the control

elements of the steam iron.

~ Even during short interruptions, always

place the steam iron in the stand|7 and

never on its sole plate|20. There is a

fire hazard!

NOTE:

• You may notice an odour when using

for the first time. This is a result of the

manufacturing process and is not a de-

fect with the device. Ensure adequate

ventilation.

The sole plate|20 cools down slightly during

ironing. In order to reach the set temperature

again, the device heats the sole plate|20 up

again, during which the temperature control

lamp|14 is lit. The temperature control

lamp|14 goes out again when the set tem-

perature is reached. This process repeats it-

self during ironing.

Ironing with cable: simply continue iron-

ing during the heating phase.

If you wish to shorten the power cable some-

what, press it into the cable clamp|22 at the

desired point.

Cable-free ironing: the steam iron stands

on the stand|7.

Wait until the temperature control lamp|14

goes out. For purposes of heating up, regu-

larly place the steam iron on the stand|7.

7.1 Filling the water tank

DANGER!

~ Pull the mains plug out of the socket be-

fore you fill up the water tank|15.

• Use clean tap water without any addi-

tives (e.g. vinegar, limescale remover,

starch, perfume, softener).

• The integrated anti-limescale protection

reduces limescale deposits for average

water hardness, and thus extends the

service life of the device. If your tap wa-

ter is hard, use distilled water. Where

the water is moderately hard, mix dis-

tilled water and tap water at a ratio of

1:1.

1. Disconnect the mains plug from the wall

socket.

2. Set the steam flow rate controller|3 to

3. The switch|11 is in the position . Re-

move the steam iron from the stand|7.

4. Open the lid|2 (of the water tank) and

tilt the iron forwards slightly to fill it.

5. Use the measuring beaker|21 to pour in

water up to the mark|19 max, but at

least up to one quarter. Hold the steam

iron upright to check.

6. Close the lid|2 (of the water tank).

7. Place the steam iron on the stand|7 and

set the steam flow rate controller|3 to

the desired position.

7.2 Set iron temperature

NOTE:

• The steam iron must be connected to the

stand|7 in order to heat up.

1. Figure C: Set the desired temperature

using the temperature controller|17:

BB1$6B%XHJHOHLVHQB%ERRN6HLWH0RQWDJ$XJXVW

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBK 2400 E4 - IAN 279757 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDBK 2400 E4 - IAN 279757 Manual

Product: