656666

Silvercrest SDBK 2400 E4 - IAN 279757 Manual

11
Zoom out
Zoom in
Previous page
1/86
Next page
9
GB
- MIN the device is not getting hot
-
÷ temperature: up to
approx. 110 °C
(synthetic materials)
-
÷÷ temperature: up to
approx. 150 °C
(Silk, wool)
-
÷÷÷ temperature: up to
approx. 210 °C
(linen, cotton)
- MAX maximumtemperature
2. The temperature control lamp|14 is lit
for as long as the steam iron is heating.
It goes out when the set temperature has
been reached. You can then begin iron-
ing.
7.3 Spray function
Use the spray function in order to dampen
dry items of laundry. This option is available
irrespective of the set temperature. For this
purpose, the water tank|15 must be at least
one quarter full.
• Repeatedly press the spray button|5 .
While doing so, hold the steam iron
horizontally with the tip over the item of
laundry. Ensure that no water sprays
onto the ground.
7.4 Ironing without steam
Sensitive fabrics are ironed at lower temper-
atures and without steam. In order to damp-
en them, the spray function is available.
1. Set the steam flow rate control|3 to
and set the temperature controller|17 to
MIN.
2. Fill the water tank|15 if you wish to use
the spray function.
3. Place the steam iron in the stand|7.
4. Connect the mains plug with the wall
socket.
5. Set the desired temperature using the
temperature controller|17. The tempera-
ture control lamp|14 lights up.
6. Start ironing as soon as the ironing tem-
perature has been reached and the tem-
perature control lamp|14 goes out.
7. Finish ironing, set the temperature con-
troller|17 to MIN and pull out the
mains plug.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank|15 through the filling open-
ing in the water tank (under the lid|2).
7.5 Ironing with steam
Steam ironing requires a high temperature,
at least the temperature setting for . In or-
der to additionally dampen items of cloth-
ing, the spray function is also available.
1. Set the steam flow rate control|3 to
and set the temperature controller|17 to
MIN.
2. Fill the water tank|15.
3. Place the steam iron in the stand|7.
4. Connect the mains plug with the wall
socket.
5. Set the temperature controller|17 to the
desired temperature (at least ). The
temperature control lamp|14 lights up.
6. As soon as the ironing temperature has
been reached and the temperature con-
trol lamp|14 goes out, adjust the steam
flow rate controller|3 to the desired
steam flow rate and start ironing.
The steam will ...
… start to come out as soon as you hold
the steam iron horizontal, and
… stop as soon as:
- you hold the steam iron vertically,
- you place the steam iron into the
stand|7,
- the temperature is too low,
- the water tank|15 is empty
or
- you set the steam flow rate control-
ler|3 to .
BB1$6B%XHJHOHLVHQB%ERRN6HLWH0RQWDJ$XJXVW
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBK 2400 E4 - IAN 279757 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBK 2400 E4 - IAN 279757 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info