645206
53
Zoom out
Zoom in
Previous page
1/62
Next page
51
GB
7.1 Filling the water tank
DANGER!
~ Pull the mains plug out of the socket be-
fore you fill up the water tank 16.
Use clean tap water without any addi-
tives (e.g. vinegar, limescale remover,
starch, perfume, softener).
The integrated anti-limescale protection
reduces limescale deposits for average
water hardness, and thus extends the
service life of the device. If your tap wa-
ter is hard, use distilled water. Where
the water is moderately hard, mix dis-
tilled water and tap water at a ratio of
1:1.
1. Disconnect the mains plug from the wall
socket.
2. Set the steam flow rate controller 5 to
.
3. The switch 11 is in the top position
. Remove the steam iron from the
stand 12. The cable base 10 remains
in the stand.
4. Open the lid 2 (of the water tank) and
hold the device at an angle to fill it.
5. Use the measuring beaker 22 to pour in
water up to the mark 21 max, but at
least up to one quarter. Hold the steam
iron upright to check.
6. Close the lid 2 (of the water tank).
7. Place the steam iron on the stand 12
and set the steam flow rate controller 5
to the desired position.
7.2 Set iron temperature
NOTE:
The steam iron must be connected to the
cable base in order to heat up.
1. Figure D: Set the desired temperature
using the temperature controller 19:
- MIN the device is not getting hot
-
÷ Temperature: up to approx.
110 °C
-
÷÷ Temperature: up to approx.
150 °C
-
÷÷÷ Temperature: up to approx.
210 °C
- MAX maximum temperature:
2. The temperature control lamp 14 is lit
for as long as the steam iron is heating.
It goes out when the set temperature has
been reached. You can then begin iron-
ing.
7.3 Spray function
Use the spray function in order to dampen
dry items of laundry. This option is available
irrespective of the set temperature. For this
purpose, the water tank 16 must be at least
one quarter full.
Press the spray button 3 repeatedly.
While doing so, hold the steam iron
over the item of laundry. Ensure that no
water sprays onto the ground.
B&3(B'DPSIEJHOHLVHQB%ERRN6HLWH0LWWZRFK-XOL
53


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sdbk-2400-d3---ian-270055

Reset search

  • Where cwn i get a spare part for my silvercrest steam iron? Submitted on 11-2-2017 at 08:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBK 2400 D3 - IAN 270055 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBK 2400 D3 - IAN 270055 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info