Manual Silvercrest SDBK 2400 D3 - IAN 270055 (page 54 of 62) (English, German, Dutch, French)

645206

Zoom out

Zoom in

1/62

7.4 Ironing without steam

Sensitive fabrics are ironed at lower temper-

atures and without steam. In order to damp-

en them, the spray function is available.

1. Set the steam flow rate control 5 to

and set the temperature controller 19 to

MIN.

2. Fill the water tank 16 if you wish to use

the spray function.

3. Place the steam iron in the stand 12.

4. Connect the mains plug with the wall

socket.

5. Set the desired temperature using the

temperature controller 19. The tempera-

ture control lamp 14 lights up.

6. Start ironing as soon as the ironing tem-

perature has been reached 14 and the

temperature control lamp goes out.

7. Finish ironing, set the temperature con-

troller 19 to MIN and pull out the

mains plug.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank 16 through the filling open-

ing in the water tank (under the lid 2).

7.5 Ironing with steam

Steam ironing requires a high temperature,

at least the temperature setting for . In or-

der to additionally dampen items of cloth-

ing, the spray function is also available.

1. Set the steam flow rate control 5 to

and set the temperature controller 19 to

MIN.

2. Fill the water tank 16.

3. Place the steam iron in the stand 12.

4. Connect the mains plug with the wall

socket

5. Set the temperature controller 19 to the

desired temperature (at least ). The

temperature control lamp 14 lights up.

6. As soon as the ironing temperature has

been reached and the temperature con-

trol lamp 14 goes out, adjust the steam

flow rate controller 5 to the desired

steam flow rate and start

ironing.

The steam will...

… start to come out as soon as you hold

the steam iron horizontal, and

… stop as soon as:

- you hold the steam iron vertical,

- you place the steam iron in the

stand12,

- the temperature falls too low,

- the water tank is empty,

- you set the steam flow rate controller

5 to .

7. Finish ironing, set the temperature con-

troller 19 to MIN, set the steam flow

rate controller 5 to and pull out the

mains plug.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank 16 through the filling open-

ing in the water tank (under the lid 2).

7.6 Steam burst function

The steam burst function requires a high tem-

perature. Select a temperature setting be-

tween and MAX. For this purpose, the

water tank 16 must be at least one quarter

full.

• Press the steam burst button 4 while

the steam iron glides over the item of

laundry.

• Wait a few seconds before you press

the steam burst button 4 again.

NOTE:

• For smoothing items of clothing that are

hanging up, you can use the steam

burst in a vertical position.

B&3(B'DPSIEJHOHLVHQB%ERRN6HLWH0LWWZRFK-XOL

Where cwn i get a spare part for my silvercrest steam iron? Submitted on 11-2-2017 at 08:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBK 2400 D3 - IAN 270055 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDBK 2400 D3 - IAN 270055 Manual

Product: