749527

Silvercrest IAN 347713 SVEB 160 A1 Manual

33
Zoom out
Zoom in
Previous page
1/141
Next page
31
GB
3. Place the bag in the device. For this pur-
pose, the end of the film bag must be
positioned just before the rear reference
ridges12 and the side reference ridg-
es13.
4. Ensure that there are no creases in the
film bag - especially above the welding
wire15.
5. Close the lid17 and press it down
slightly.
6. Press the button 1 to switch the de-
vice to standby. The LED is lit.
7. Press the button 5. The LED is lit. The
film bag is first vacuum-packed and
then sealed.
The LED goes out when the process is
complete.
NOTE: if the LED5 does not go out and the
noise of the vacuum pump does not stop, de-
spite the fact that no further air is being
sucked out of the film bag, cancel the pro-
cess. Check that the film bag is in the correct
position in the device, and check for leaks.
8. Open the lid17 and remove the bag.
9. Check the welding seam. It should be a
smooth creaseless seam.
9.5 Sealing the bag
(without vacuum)
1. Proceed in the same way as for vacu-
um-packing and sealing (see “Vacuum-
packing and sealing the bag” on
page 30) until step 6.
2. Place the vacuum bagging tube in the
vacuum sealer on the front edge of the
lower sealing ring
14
.
3. Press the button 6. The LED is lit.
The film bag is being sealed. The seal-
ing process is automatically terminated
and the LED goes out.
4. Open the lid17 and remove the bag.
5. Check the welding seam. It should be a
smooth creaseless seam.
__347713_Vakuumierer_B8.book Seite 31 Montag, 27. Juli 2020 12:36 12
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 347713 SVEB 160 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 347713 SVEB 160 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info