749527
32
Zoom out
Zoom in
Previous page
1/141
Next page
30 GB
4. Open the lid
17
.
5. Place the vacuum bagging tube in the
vacuum sealer on the front edge of the
lower sealing ring
14
as shown.
6. Ensure that there are no creases in the
film bag - especially above the welding
wire15.
7. Close the lid17 and press it down
slightly.
8. Press the button 1 to switch the de-
vice to standby. The LED is lit.
9. Press the button 6. The LED lights
up, the pump runs, the lid is sucked in
and the film is sealed. The sealing pro-
cess is automatically terminated and the
LED goes out.
10. Open the lid17 and remove the bag.
11. Check the welding seam. It should be a
smooth creaseless seam.
9.3
Filling the bag
CAUTION:
~No food or liquids must be present at
the top edge, where you want to seal
the bag. That area must be clean and
dry. Otherwise, it is impossible to pro-
duce a proper welding seam.
Only fill the bag to approx 7 to 8 cm
below the top edge.
9.4 Vacuum-packing and
sealing the bag
DANGER! Risk of electric
shock due to moisture!
~For vacuum-packing, no liquids must be
inside the bag.
~Ensure that no liquid is sucked in during
the extraction of air. If this occurs, inter-
rupt the process immediately by press-
ing the stop button 8.
DANGER! Risk of injury from
burning!
~The welding wire15 becomes very hot
during operation. Do not touch the hot
welding wire15.
NOTE: when vacuum-packing film bags,
there must not be any vacuum tube20
plugged into the connection9.
1. Smooth the bag where it is to be
sealed.
2. Open the lid17.
__347713_Vakuumierer_B8.book Seite 30 Montag, 27. Juli 2020 12:36 12
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 347713 SVEB 160 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 347713 SVEB 160 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info