749527
35
Zoom out
Zoom in
Previous page
1/141
Next page
33
GB
10.2 Vacuum-packing
vacuum bags with a
valve
1. Place the prepared food into the vacu-
um bag. Ensure that there is no food un-
der the valve.
2. Carefully close the vacuum bag.
3. Place the vacuum bag flat on a level
surface with the valve pointing up-
wards.
4. Proceed as for vacuum containers, start-
ing at step 2. (see “Vacuum-packing
vacuum containers” on page 32), and
use adapter A21.
NOTE: suitable vacuum bags with valves
can be ordered from the online shop under
article number 306376 (see “Ordering film
bags and accessories” on page 36).
11. Using additional
functions
11.1 Activating the Wet
function
DANGER! Risk of electric
shock due to moisture!
~For vacuum-packing, no liquids must be
inside the bag.
~Ensure that no liquid is sucked in during
the extraction of air. If this occurs, inter-
rupt the process immediately by press-
ing the stop button 8.
If the bag contains moist food (e.g. marinad-
ed meat/fish, ready-to-use cut vegetables/
fruit), this can result in incomplete seals. By
activating the Wet function 7, the dura-
tion of the sealing process is increased, in
order to achieve a better welding seam.
Press the 7 button before vacuum-
packing/sealing to activate the func-
tion. The LED is lit.
To deactivate the function, press the but-
ton 7 again.
If you press the stop button 8, the
Wet function 7 is also deactivated.
When the vacuum-packing/sealing pro-
cess is completed or has been can-
celled, the LED goes out and the
function is automatically deactivated.
During the vacuum-packing/sealing
process, the Wet function 7 can nei-
ther be activated nor deactivated.
NOTE: this function is not suitable for vacu-
um-packing liquids, e.g. soup. These need
to be frozen before vacuum-packing.
11.2 Activating the Soft
function
The Soft function 2 reduces the vacuum
pressure slightly, so that pressure-sensitive
food (e.g. berries or cake) is not com-
pressed.
Press the 2 button before vacuum-
packing/sealing to activate the func-
tion. The LED is lit.
To deactivate the function, press the
2 button again.
If you press the stop button 8, the
Soft function 2 is also deactivated.
When the vacuum-packing/sealing pro-
cess is completed or has been can-
celled, the LED goes out and the
function is automatically deactivated.
During the vacuum-packing/sealing
process, the soft function 2 can nei-
ther be activated nor deactivated.
__347713_Vakuumierer_B8.book Seite 33 Montag, 27. Juli 2020 12:36 12
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 347713 SVEB 160 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 347713 SVEB 160 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info