751860
32
Zoom out
Zoom in
Previous page
1/141
Next page
30 GB
How to recognise bad oil
If you identify one of the following fea-
tures in the oil you are using, you should
replace it completely:
- pungent, bad smell;
- fried food tastes bad;
- brown, hard deposits;
- foam formation during heating;
- thick smoke formation even at low
temperatures.
What to do with the old oil?
WARNING! Risk of material damage!
~Frying oil and fat should not be dis-
posed of into drains or the toilet! The oil
or fat solidifies and can block the
drains.
Fat and oil can be disposed of as house-
hold waste in the customary household
quantities.
Do not put the fat/oil directly into the
wheelie bin, but first place it into the
original packaging or a plastic bag.
You can also take the fat/oil to a desig-
nated collection point for used oil.
6. How to use
Remove all packing materials.
Check whether all accessories are pres-
ent and undamaged.
Clean the device prior to first
use! (see “Cleaning and storage” on
page 33).
Place the device on a dry, level, non-slip
surface. This surface should also be
heat-resistant and not be damaged by
splashes of hot fat.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is due to the assembly
materials used for the heating element and
is not a fault in the product. Ensure adequate
ventilation.
7. Operation
7.1 Setting up
FIRE HAZARD / DANGER of
burns!
~The mains plug22 should only be put
into the wall socket after the oil contain-
er8 has been filled with oil or melted
fat at least up to the MIN12 marking.
~All parts of the deep fryer must be com-
pletely dry, when you use the device.
~Put the deep fryer on a stable, flat, non-
slip, dry, and non-flammable work sur-
face.
~Do not use the deep fryer under wall
units and not near to any curtains, pa-
per or any similar flammable objects.
~Do not place the device directly under a
wall socket.
~Keep a distance of at least 50 cm on all
sides.
__322493_Edelstahl Fritteuse_B8.book Seite 30 Freitag, 28. Juni 2019 9:32 21
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 322493 SEF3 2000 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 322493 SEF3 2000 D3 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info