752598

Silvercrest IAN 315413 HG03661 Manual

23
Zoom out
Zoom in
Previous page
1/83
Next page
23 GB/IE
Note: The blades can be oiled with or without
comb attachment
11
and thinning attachment
12
.
Operation
Changing the attachments
Carefully place the desired comb attachment 11
onto the product as depicted in Fig. F. Ensure
that both recesses of the comb attachment 11
properly engage into the lateral detents at both
sides above the cutting unit 1.
To remove the comb attachment 11 , press and
s
lide it forward and upwards using both t
humbs,
as depicted in Fig. G.
Setting the trim length
To set different trim lengths, hold the upper part
of the product 2 and twist the lower part of
the product 5 into the desired position
(0.8–2.0 mm). The set trim length will be dis-
played on the length position indicator 4
which aligns with the dot-marking on the upper
part of the product 2.
Trimming hair
Note: The hair being trimmed should be clean,
dry and untangled.
Carefully comb the hair using the supplied
comb 17 to disentangle any potential knots.
Place the hairdressing cape 15 around the
neck and nape to prevent bits of hair from
falling into the collar.
Begin by using the longer comb attachment 11
and trim the hair gradually to the desired length.
Note that the desired trim length can only be
achieved if the product is held perpendicularly
to the skin‘s surface.
Avoid making sudden movements when
trimming.
Switch the product on by pressing down the
travel lock 3a and sliding the ON / OFF switch
3b to the “I“ position. To maximize performance,
slide the ON / OFF switch 3b to the “Turbo“
position. The Turbo display 8 will appear on
the display if this is the case.
Always trim from the nape in the direction of
the top of the head, or from the forehead and
temples towards the centre of the head.
Guide the product slowly and steadily through
the hair. If possible, trim against the direction
of the hair‘s growth.
While doing so, hold the product in such a
way that the selected comb attachment 11 is
positioned as level as possible.
Move the product over the head several times
to collect all of the hair. To achieve a straight
line, move the product through the hair several
times from different directions.
Comb the hair repeatedly.
You can graduate the desired trim length of
the comb attachment 11 more accurately by
rotating the lower part of the product 5 ac-
cording to length position indicator 4. These
gradations differ by 0.3 mm.
Example:
Comb attachment 3.0 mm (trim length
3.8–5 mm):
Furthermost left
position (0.8 mm): short hair (3.8 mm)
Middle
position (1.4 mm): mid-length hair (4.4 mm)
Furthermost right
position (2.0 mm): long hair (5.0 mm)
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 315413 HG03661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 315413 HG03661 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info