752598
22
Zoom out
Zoom in
Previous page
1/83
Next page
22 GB/IE
Before use
Note: The product may be powered using the
built-in rechargeable battery or the plug-in mains
adapter.
Remove all parts from the package.
Charging
Note: Before first use, the rechargeable battery in
the product should be charged for at least 90 minu-
tes. A charging time of 90 minutes is also required
subsequently.
The product can be charged directly or indirectly by
using the charging base 6.
Note: The charging process is shown on the dis
play
of the charging display 9 and the battery-status
display 10 .
Direct charging (see Fig. C)
To avoid injuries and damage to the product,
always switch the product off before charging
the battery (ON / OFF switch 3b set to the
“0“ position).
Insert the cable plug of the plug-in mains ad-
apter 7 into the socket on the underside of
the product.
Insert the plug-in mains adapter 7 into a
socket which meets the product requirements.
Indirect charging (see Fig. D)
To avoid injuries and damage to the product,
always switch the product off before charging
the battery (ON / OFF switch 3b set to the
“0“ position).
Connect the cable plug of the plug-in mains
adapter 7 with the charging base 6.
Place the product into the recess of the char-
ging base 6 with the cutting unit 1 pointing
upwards.
Insert the plug-in mains adapter 7 into a
socket which meets the product requirements.
Note: During the charging process, the red
charging display 9 will light up and the battery
status display 10 will show the battery level.
Note: As soon as the battery is charged, the
battery status display 10 will switch off, while the
charging display 9 will continue to be red.
Note: You can use the product for up to approx.
60 minutes with a full battery without it being
connected to the power supply.
Note: When the battery is almost empty, the char-
ging display 9 on the display will flash. Then, the
product may only be used for a short period of
time without being connected to the power supply.
Operating using the plug-in mains adapter:
If the product stops working during use due to an
empty or insufficient battery, you can continue if
the plug-in mains adapter is connected.
Insert the cable plug of the plug-in mains ad-
apter 7 into the socket on the underside of
the product.
To avoid injuries and damage to the product,
always switch the product off before connecting
to the plug-in mains adapter 7.
Insert the plug-in mains adapter 7 into a
socket which meets the product requirements.
After a few seconds you can switch on the pro-
duct by pressing down the travel lock 3a and
sliding the ON / OFF switch 3b into the desired
position for the desired speed. If the product
does not start working immediately, switch it
off by sliding the ON / OFF switch 3b to the
“0“ position. Wait approx. 1 minute before
you try to switch it on again.
Oiling the blades
It is recommended that you oil the blades before
first use and after cleaning to guarantee complete
functionality (see Fig. E).
Apply one or two drops of blade oil 14 bet-
ween the blades and distribute them evenly.
Wipe away any excess oil using a cloth.
You can also use any acid-free oil such as
sewing machine oil.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 315413 HG03661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 315413 HG03661 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info