752906
23
Zoom out
Zoom in
Previous page
1/98
Next page
23 GB/IE
submerge the shaping disk 16 in
water.
Do not bend the mains cable 3
using force, do not pull on it, do
not bundle it up or twist it and
do not place it under heavy
objects.
Do not put metal objects or flam-
mable substances in the mixing
chamber 1.
Separate the device from the
power supply when the device is
not in use.
The device is not intended for
use with an external time switch
or a separate telecontrol system.
Immediately remove the mains
plug from the socket if you see
smoke.
Do not unplug by pulling the
mains cable 3; always hold by
the plug.
Keep the mains plug clean.
Do not place objects on top of
the device!
Do not move the device while it
is operating.
The device
should always be
unplugged from the mains when
it is not supervised, and prior to
assembly, dismantling or cleaning.
Before substituting fixtures or ad-
ditional parts that move during
operation, the device must be
switched off and unplugged from
the mains.
Keep the device in a dry and
well-ventilated location after use.
FOOD SAFE! This prod-
uct has no adverse effect
on taste or smell.
ATTENTION: FIRE HAZARD
To prevent overheating, never
cover the device.
ATTENTION: DANGER OF
CUTS Moving mechanical parts
with high rotational speed! Pre-
vent injuries. Avoid touching any
parts while the device is in oper-
ation. Keep hands, hair, clothing,
dough scraper 14 and other
utensils away from moving parts
during operation. Do not touch
moving parts, in particular while
the device is connected to the
mains. Do not put your fingers or
any objects into the device while
it is running. Risk of serious injury!
Do not open the lid 4, do not
unscrew the shaping disk holder
9 to open the product, and do
not touch the mixing paddle 5
with your hands while the device
is operating. This could cause
serious injuries.
If parts get stuck, disconnect the
mains plug from the mains socket.
Then attempt to remove the
23


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-ian-313492-spm-2000-a1

Reset search

  • Dzien dobry.
    Jak moge zakupic element 98200-993-004 do Silvercrest IAN 313492 SPM 2000 A1 w Polsce
    Pozdrawiam
    Waldemar Rostkowski
    Submitted on 16-4-2023 at 20:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 313492 SPM 2000 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 313492 SPM 2000 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info