752906
22
Zoom out
Zoom in
Previous page
1/98
Next page
22 GB/IE
falls into water, first unplug it
from the mains, then remove it
from the water! Do not operate
the device after this until it has
been inspected by an approved
service point. This also applies if
the mains cable 3 or the device
becomes damaged or the device
has been dropped!
DANGER OF ELECTRIC
SHOCK! Make sure that the
mains cable 3 and the device
are never placed on hot surfaces
or near sources of heat. Lay the
mains cable 3 in such a way that
it does not come into contact
with hot or sharp-edged objects!
DANGER OF ELECTRIC
SHOCK! Never kink the mains
cable 3 and do not wrap it
around the device, as these could
cause a cable rupture!
DANGER OF ELECTRIC
SHOCK! Do not use the device
whilst standing on a wet floor or
if your hands are or the device is
wet!
DANGER OF ELECTRIC
SHOCK! Never open the device
and never attempt to get inside it
using metal objects!
Repairs may only be performed
by approved specialist workshops.
Improperly repaired devices may
be dangerous for the user.
Only connect the device to a
properly installed safety socket
with a suitable mains voltage
(see chapter „Technical data“).
To prevent accidents, do not
leave the device unattended
while it is operating.
Device specific
safety notes
Do not use the device on unstable
or sloping surfaces.
Do not remove the mains cable
3 from the plug before process-
ing is complete. If you have to
pause processing, remove the
mains cable 3 from the plug
before carrying out further pro-
cesses.
It is recommended to rest the
machine for at least 20 minutes
after four cycles in a row, so that
the motor can cool down.
If you want to use the device
without interruption, clean the
shaping disk 16 last used after
each use with the cleaning tool
14 included. To make cleaning
easier, do not immediately
22


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-ian-313492-spm-2000-a1

Reset search

  • Dzien dobry.
    Jak moge zakupic element 98200-993-004 do Silvercrest IAN 313492 SPM 2000 A1 w Polsce
    Pozdrawiam
    Waldemar Rostkowski
    Submitted on 16-4-2023 at 20:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 313492 SPM 2000 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 313492 SPM 2000 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info