753994

Silvercrest IAN 309535 SBSB 750 A1 Manual

23
Zoom out
Zoom in
Previous page
1/83
Next page
23 GB/IE
CAUTION! RISK OF DAMAGE
TO PROPERTY!
Remove any large or sharp ob-
jects before you start vacuuming.
Observe the cleaning and main-
tenance instructions provided by
your flooring manufacturer.
Only vacuum curtains and light-
weight fabrics using a low suction
power. Otherwise curtains or
materials may be sucked into
the vacuum and damaged.
Never operate the product if it is
in a vertical position or lying on
its side. The product must be po-
sitioned firmly on the floor when
in operation. Especially when
working on stairs, ensure a level
positioning and sufficient stability.
Switch off the product immedi-
ately if the suction nozzle or the
telescopic wand 4 is clogged.
Switching on the product
First make sure that all plug connections are
connected to each other correctly and firmly.
Position the product on the floor.
Adjust the telescopic wand 4 to your height.
To do so, press the telescopic wand locking
mechanism 12 and slide the sections contained
within the telescopic wand 4 into each other
or out of each other (see Fig. B).
Pull out the mains cable until it has reached the
desired length (max. approx. 7.5 m).
Plug the mains plug into a properly installed
mains socket. Ensure that the mains cable is
lying loosely on the floor between the mains
plug and the vacuum cleaner 1.
Ensure that the power control knob 13 is set to
the lowest setting by turning it to the left until it
stops.
Press the foot pedal 14 to switch on the product.
Turn the power control knob 13 to the right
until the desired power output is reached.
When vacuuming, make sure to work at an
even speed. You do not need to exert additional
pressure on the nozzle.
Note: For very dirty surfaces, use the maximum
suction power in order to achieve a high cleaning
effect.
Note: If you have accidentally vacuumed
something up, you can use the airflow regulator
17 to reduce the suction strength (see Fig. D):
If you close the airflow regulator 17 , this results
in a high suction power.
If you open the airflow regulator 17 , the suction
power is reduced.
Switching the product off
Press the foot pedal 14 to switch off the product.
Unplug the mains plug from the mains socket.
Press the foot pedal to rewind the cable 16 in
order to wind up the mains cable. The mains
cable rolls up automatically.
CAUTION! RISK OF INJURY!
Retracting the mains cable too
vigorously may lead to the mains
cable swinging from side to side
(whip effect). There is a risk of
injury. Therefore you should hold
onto the mains cable when rolling
it up.
Note: Ensure that you do not wind up the
mains cable too quickly, in order to prevent it
becoming jammed / knotted.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 309535 SBSB 750 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 309535 SBSB 750 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info