753994

Silvercrest IAN 309535 SBSB 750 A1 Manual

25
Zoom out
Zoom in
Previous page
1/83
Next page
25 GB/IE
Close the lid of the dust bag compartment until
it clicks into place audibly.
Changing / cleaning
the HEPA filter
Note: Clean the HEPA filter 21 regularly. Depending
on how frequently the product is used, it is recom-
mended that the HEPA filter 21 is changed every
6-9 months.
Remove the lid of the HEPA filter 21 by pressing
on the lever 22 (see Fig. H).
Remove the HEPA filter 21 .
To clean the HEPA filter 21 , shake it vigorously.
If the HEPA filter 21 is very dirty, you may clean
it with lukewarm, soapy water. If you do this,
leave the HEPA filter 21 to air dry. Do not dry
it using artificial means.
Insert the HEPA filter 21 back into its slot. When
inserting it, make sure that the rough side is
visible.
Before using the product, make sure that the
HEPA filter 21 is installed correctly.
Close the lid of the HEPA filter 21 .
Cleaning the vacuum cleaner
Unplug the mains plug from the mains socket
before cleaning.
Allow the vacuum cleaner 1 to cool down
fully.
Wipe down the vacuum cleaner 1 using a
slightly damp cloth. Then allow all parts to dry
completely.
Clean the suction nozzles and remove any dust
and dirt.
Troubleshooting /
Problem solving
Note: The product has a temperature switch that
protects the motor against overheating. If the product
suddenly switches itself off, proceed as follows:
Switch off the product by pressing on the foot
pedal 14 .
Unplug the mains plug from the mains socket.
Determine the cause of the overheating. It may
have been caused by the following: a clogged
hose 2, clogged dust bag or dirty HEPA filter
21 .
Clean the hose 2 and the dust bag. Also clean
the HEPA filter 21 .
Wait for around 30–40 minutes, until the motor
has cooled down.
Plug the mains plug into the mains socket and
switch the product on by pressing on the foot
pedal 14 .
If the product still does not work, switch it off
again using the foot pedal 14 and wait for a
further 20 minutes. Then switch the product on
again using the foot pedal 14 .
If the product is still not functioning, contact
customer services (see ‚Service centre‘ section).
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning: 1–7:
plastics / 20–22: paper and fibreboard /
80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 309535 SBSB 750 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 309535 SBSB 750 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info