753994
22
Zoom out
Zoom in
Previous page
1/83
Next page
22 GB/IE
the product, for example stones,
paper waste, etc.
Do not vacuum up any liquids or
damp dirt. Allow wet-cleaned or
shampooed carpets to dry fully
before vacuuming them.
Do not vacuum up any toner dust
from printers or copiers. This may
conduct electricity. Furthermore,
the filter system cannot filter out
the toner dust entirely. It would
thus potentially end up back in
the room via the blower.
Replace the dust bag as soon as
it is full. When doing so you should
also check the HEPA filter and
replace it if necessary. Otherwise
the suction power may be reduced.
Do not stand or sit on the product.
Before use
Note: If you open the packaging with a sharp knife
or other sharp objects, ensure that you do not dam-
age the product. Be very careful when opening the
packaging.
Remove the product from the packaging.
Check that the delivery contents are complete.
Check to see if the product or the individual
parts are visibly damaged. If this is the case, do
not use the product, instead contact customer
services (See ‚Service centre‘ section).
Assembling the product
Place the vacuum cleaner 1 on the floor.
Insert the socket end of the hose 2 into the
suction opening. The socket end of the hose
must noticeably click into place (see Fig. A).
Attach the telescopic wand
4
to the hose
2.
When doing so, rotate the telescopic wand 4
right and left for a more stable hold.
Select a nozzle from the delivery contents
according to the surface to be vacuumed:
· Floor brush 8: Use this attachment to vacuum
a dusty carpet or hard floor.
· Parquet brush 9: Use this attachment to
vacuum particularly delicate surfaces.
· Crevice nozzle 3: Use this attachment to
vacuum in places that are not easy to reach.
· Furniture brush 7: Use this attachment to
vacuum objects which have particularly delicate
surfaces.
Take the chosen nozzle and insert it into the
other end of the telescopic wand 4.
Note: Alternatively, you can also insert the
chosen nozzle directly into the handle of the
hose 2.
Dismantling the hose
To loosen the hose 2, press the unlock buttons
11 and at the same time pull the hose 2 out
of the suction opening.
Initial use
CAUTION! RISK OF INJURY!
Always be attentive when oper-
ating the product. Injuries may
otherwise occur.
Always vacuum stairs from bottom
to top.
Do not vacuum people or animals.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 309535 SBSB 750 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 309535 SBSB 750 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info