Manual Silvercrest IAN 306041 SSR 3000 A1 (page 27 of 85) (English, German, Dutch, French, Polish, Swedish)

752909

Zoom out

Zoom in

1/85

27 GB/IE

Note: By pressing the Clean button again on

the robot vacuum cleaner 11 or the remote con-

trol 27 , the product will return to the original

cleaning mode.

Corner mode

This mode is suitable for cleaning the corners and

edges of a room. In Corner mode, the product

follows a barrier (for example a wall).

During cleaning, press the Corner mode button

28 on the remote control to start this mode.

In this mode, the product will return to the

charging dock 2 after cleaning.

Note: You can end Corner mode by pressing

the Clean button once on the robot vacuum

cleaner 11 or on the remote control 27 .

Note: By pressing the Clean button again on

the robot vacuum cleaner 11 or the remote

control 27 , the product will return to the original

cleaning mode.

Time-delayed cleaning /

ﬁxed time

Using this function, you can set a time period, after

which the product will begin cleaning. Smallest time

period: 15 minutes, largest time period: 23 hours

and 45 minutes.

Press the Clean button on the robot vacuum

cleaner 11 or on the remote control 27 (if no

notiﬁcation is visible in the display 1).

Press the Set schedule button on the robot vac-

uum cleaner 12 or the remote control 30 . The

last two digits in the display 1 will ﬂash.

Using the Return mode 13 and Spot mode 14

buttons on the robot vacuum cleaner, set the

desired time in minutes (00, 15, 30, 45). To do

this, you can also use the directional buttons

26 on the remote control.

Press the Set schedule button on the robot vac-

uum cleaner 12 or on the remote control 30

again. The ﬁrst two digits in the display 1 will

ﬂash.

Using the Return mode 13 and Spot mode 14

buttons on the robot vacuum cleaner, set the

desired time in hours (01 - 23). To do this, you

can also use the directional buttons 26 on the

remote control.

Finally, press the Clean button on the robot

vacuum cleaner 11 or on the remote control

27 to conﬁrm your selections.

After the set time has expired, the product will turn

itself on automatically and begin cleaning.

Note: If you turn the product oﬀ using the power

switch 9, the saved settings will be lost.

Cleaning and storage

Set the power switch 9 to position „O“ before

cleaning the product.

Unplug the mains lead 4 from the mains

socket before cleaning the product.

Do not rinse the product directly with water.

Do not wipe the product with a cloth soaked in

water.

Disconnect the power supply if the product will

not be used for an extended period.

Cleaning the dust collector

Open the product by pressing on the cover 10

where it says PUSH.

Remove the dust collector 21 and open it by

pushing the cover 22 upwards.

Remove the main ﬁlter 23 and empty the dust

collector 21 .

Fold the dust collector cover 22 forwards and

remove the ﬁlter frame 24 together with the

HEPA ﬁlter 5 from the outside of the dust

collector 21 .

Rinse the dust collector 21 under running water

or clean it using a damp cloth. Then wipe the

dust collector 21 until it is dry.

Clean the main ﬁlter 23 and the HEPA ﬁlter 5

with the cleaning brush 7. Only reinstall the

ﬁlters when they are dry.

First, insert the HEPA ﬁlter 5 back into the ﬁlter

frame 24 , then insert into the dust collector 21 .

jeg har fejl e 12 hvad er det,har ikke manual mere Submitted on 6-6-2021 at 17:50
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 306041 SSR 3000 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 306041 SSR 3000 A1 Manual

Product: