Manual Silvercrest DTL 1026 IAN 49387 (page 9 of 18) (English)

737513

Zoom out

Zoom in

1/18

re-freeze raw meat! Ice cream and cakes

that have thawed must not be frozen again

either (risk of salmonella!)

Danger of explosion!

Never freeze highly carbonated drinks. There

is a risk of explosion!

Caution!

Leave the appliance in a stable position for

at least 3 hours after installing it, so that the

refrigerant can settle. The compressor might

be damaged otherwise.

When you first put the appliance into use, let

it run for 24 hours without any interruption.

If you happen to switch off the appliance or

pull the mains plug from the socket during

this period, wait for at least 5 minutes be-

fore switching on the appliance again or re-

inserting the plug. The compressor might be

damaged otherwise.

Putting into use / first freeze

1. Insert the mains plug into a wall socket (220

- 240 V~; 50 Hz) that has been installed in ac-

cordance with the applicable regulations.

2. Open the fridge compartment door and turn

the temperature regulator 4 in a clockwise di-

rection to position "5" (cf. illustration O).

The appliance is on, the interior light is on,

the motor starts to work, refrigerant is flow-

ing though the pipes and you will hear a slight

"humming sound".

3. If the appliance makes any irritating noise,

check that it is positioned stably and remove

any objects from the top of the appliance.

4. Put the food to be refrigerated into the fridge

compartment and close the door.

5. As soon as the freezer compartment is at a

temperature of approx. –18 °C (use a fridge/

frost thermometer to check), you can store the

products to be frozen.

Regulating the temperature

The temperature regulator 4 is used to regulate

the temperature in the fridge and freezer compart-

ments. It depends on

the room temperature. If necessary, select a –

higher setting when the ambient temperature

goes up, e.g. in summer.

the temperature and volume of the products to –

be refrigerated or frozen that have recently been

put in the appliance. The greater the volume of

the products and the higher their temperature,

the higher the setting should be.

how often and how long the door is opened. –

The refrigeration performance can be set continu-

ously: from "0" (the appliance is off) to "5" (lowest

temperature setting).

1. Turn the temperature regulator in a clockwise

direction from "0" to a medium setting.

2. The ideal storage temperature for frozen food

is –18 °C. Use a fridge/frost thermometer (not

included) to check the temperature in the com-

partment.

3. Adjust the setting if the ambient temperature

changes.

Making ice cubes

1. Fill the ice cube tray 12 3/4 full with cold water.

2. Put it in the freezer compartment.

3. Wait for the water to freeze.

4. Twist the tray or briefly hold it under running

water to release the ice cubes.

Rearranging the door racks

1. Lift the door rack and take it off the door (see

illustration P).

2. Place the door rack in its new position over

both holders on the sides and lower it into po-

sition.

Switching off the appliance

Switch off your appliance if you intend not to use it

for a considerable period of time.

1. Set the temperature regulator 4 to "0".

2. Pull the mains plug from the wall socket if you

want to switch off the appliance for quite a long

time.

3. Empty the appliance, defrost it and clean it.

4. Leave the door ajar so that no mould forms in-

side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest DTL 1026 IAN 49387 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest DTL 1026 IAN 49387

Silvercrest DTL 1026 IAN 49387 User Manual - German, Dutch, French, Italian - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest DTL 1026 IAN 49387 Manual

Product: