Manual Silvercrest DTL 1026 IAN 49387 (page 8 of 18) (English)

737513

Zoom out

Zoom in

1/18

Fitting the distance spacer

To achieve sufficient air circulation, fit the dis-•

tance spacer 16 in the upper part of the con-

denser 18 (see illustration B).

Replacing the door stop

You can alter the direction the door opens. The ap-

pliance is delivered with the door stop on the right.

You can change the location of the door stop. This

calls for some skill so please read the procedure

described below first. You need:

– a crosshead screwdriver (not included)

– a second person.

1. Make sure that the mains plug is not in the

socket.

2. Unscrew the adjusting feet 17 if they have

been installed (see illustration N)

3. Unscrew the screws from the lower hinge of

the fridge compartment door (see illustrations

C and D).

4. Remove the fridge compartment door from

the appliance.

5. Open the freezer compartment door, hold it

steady and unscrew the central hinge (see il-

lustration E).

6. Put the freezer compartment door aside.

7. Remove the blind plugs from the left-hand

side and fit them in the holes that have now

been opened up.

8. Unscrew the hinge pin from the upper cover

(see illustration F).

9. Screw the hinge pin into the left-hand side of

the unit (see illustration G).

10. Now for the doors. There is a hinge pin holder

and a blind plug on the upper side of the

freezer compartment door and on the lower

side of the fridge compartment door. Carefully

pry out the blind plug and the hinge pin holder

and swap them (see illustration H).

11. Insert the hinge pin holder on the other side

of the fridge compartment door (see illustra-

tion J).

12. Place the top end of the freezer compartment

door over the upper hinge pin and hold the

door steady.

13. Put the central hinge into the lower end of the

freezer compartment door and screw it into

place (see illustration K).

14. Place the top end of the fridge compartment

door over the pin of the central hinge and

close the door.

15. Screw the lower hinge onto the appliance and

the fridge compartment door (see illustrations

L and M).

Levelling the appliance

The appliance must be on a flat, stable surface.

Check the position of the appliance, preferably

using a spirit level. The appliance must not move

when the door is opened. If the surface is not com-

pletely level, you can level the appliance using the

two front adjusting feet. Ask a second person to

help you.

1. Close the door of the appliance.

2. Tilt the appliance forwards slightly.

3. Turn the adjusting feet 17 in or out to level the

appliance (see illustration N).

4. Put the appliance back in position and use a

spirit level to check that it is properly aligned.

Operation

Danger of injury!

Never touch the ice on the walls of the in-

terior compartment, frozen products or ice

cream with wet hands. Injury is even possi-

ble if your skin is dry. If necessary, use a dry

cloth to handle frozen products.

Health hazard!

Do not re-freeze food that has partially or

completely thawed. Vegetables that have

partially thawed are not bad for your health,

but their quality may have been significantly

affected. You can cook meat that has thawed

and freeze it again as a ready meal. Never

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest DTL 1026 IAN 49387 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest DTL 1026 IAN 49387

Silvercrest DTL 1026 IAN 49387 User Manual - German, Dutch, French, Italian - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest DTL 1026 IAN 49387 Manual

Product: