685070
8
Zoom out
Zoom in
Previous page
1/48
Next page
8
EN
y Neck: Stroke downwards.
U
After treatment, wash the treated area with cold water to remove remaining
debris and gently pat dry. Apply a toner, serum or cream to minimize your
pores and soothe your skin for the optimal ecacy of your treatments.
U
Light bruising and redness is completely normal after treatments and
should subside within 24 hours. Eective dermabrasion treatments gently
remove the outer layer of skin which may cause slight discomfort and
redness.
C
Stop using the device immediately if you develop any abnormal reactions
such as itching, uncomfortable inammation, or scratches.
6.2 Attaching the tip
a
Make sure the device is switched o and unplugged before attaching or
changing the tip.
a
Always make sure a lter and O-ring are in place. Refer to the chapter
“Replacing the lter or “Replacing the O-ring” for replacement if necessary.
1. Attach the desired tip (
8
/
9
/
10
/
11
) to the device.
2. Make sure the tip is rmly in place before use.
6.3 Operating in Auto mode
Auto mode is only for facial treatments.
1. Press the power button
5
to switch on the device.
2. Press the mode button
3
to select Auto mode.
3. Press the control buttons
6
to select the desired intensity level.
Level 1 is the lowest level; while level 3 is the highest level.
4. Press the start/pause button
4
to begin the treatment.
y Treat the facial area indicated on the LCD display. The LCD display also
shows the countdown of the treatment time for each facial area.
You will hear 2 beeps when the time elapses.
y Move to the next facial area indicated on the display after each 2
beeps until the treatment cycle is completed.
y During the treatment, you can press the Start/pause button and
then press the control buttons anytime to switch to another facial
area.
Revit Prestige Canada 4390A ED343-02.indd 8 10/06/2018 14:00:38
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn ReVit Prestige Diamond Microderm Wand at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn ReVit Prestige Diamond Microderm Wand in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info