685070
6
Zoom out
Zoom in
Previous page
1/48
Next page
6
EN
5. Charging
Risk of injury
C
Do not charge when the device is in use or if it is wet. Make sure it is dry
before charging.
C
Only charge the device with the enclosed charging cradle, USB adapter and
USB cable.
C
Charge the device at temperatures between 0 and 40 °C.
C
Always unplug the device after charging has been completed.
It takes about 3 hours to fully charge the device. When the charging process is
completed, the LCD display shows the charging status as full.
Option 1 (via mains supply):
1. Place the device
1
onto the charging cradle
7
by tting the hole in its
bottom to the pin of the charging cradle.
2. Connect the USB cable
13
to the charging cradle and connect its USB
connector to the USB adapter
12
.
3. Plug the USB adapter into a mains socket.
Option 2 (via USB port):
1. Connect the USB cable
13
to the charging cradle
7
with the device
properly installed.
2. Connect its USB connector to a compatible USB power source.
6. Operation
U
Clean all parts of the device before rst use as described in the chapter
“Cleaning and maintenance”.
U
Make sure the lter, O-ring and the desired tip have been installed properly
before use.
U
Before treating an area for the rst time, perform a skin sensitivity test on a
spot. If you have no adverse reaction, start your treatment.
Revit Prestige Canada 4390A ED343-02.indd 6 10/06/2018 14:00:38
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn ReVit Prestige Diamond Microderm Wand at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn ReVit Prestige Diamond Microderm Wand in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info