685070
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
EN
7.3 Replacing the lter
The lter should be replaced regularly for optimal results. Always make sure that
the lter is in place to prevent particles such as dead skin cells or debris from
entering the motor.
1. Gently remove the tip (
8
/
9
/
10
/
11
) and discard the lter
14
.
2. Replace with a new lter and put the tip back into place.
7.4 Replacing the O-ring
The O-ring should only be replaced if it is damaged or worn. Always make sure
that the O-ring is in place, otherwise the device will not work properly.
1. Gently remove the tip (
8
/
9
/
10
/
11
) and discard the O-ring
15
.
2. Replace with a new O-ring and put the tip back into place.
8. Storage
U
All parts must be completely dry before being stored in the pouch
17.
You
can also use the charging cradle
7
as a stand to hold the device.
U
Do not wind the USB cable
13
round the device.
9. Troubleshooting
Some problems may be caused by minor faults that you can x yourself. To do so,
follow the instructions in the following table. If it is still not possible to resolve the
problem, contact customer service. Do not repair the device yourself.
Fault Possible cause and solution
The device won't
turn on.
Make sure the USB adapter is securely plugged in the
charging cradle, and plugged into a working mains socket
for at least one hour. The battery symbol on the LCD display
should indicate that device is charging. If the battery symbol
does not come on, contact our customer service.
Revit Prestige Canada 4390A ED343-02.indd 10 10/06/2018 14:00:38
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn ReVit Prestige Diamond Microderm Wand at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn ReVit Prestige Diamond Microderm Wand in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info