685072
10
Zoom out
Zoom in
Previous page
1/12
Next page
8
English
11. Revit™ Maintenance
11.1 Cleaning Revit™
It is recommended that you clean your Revit™ device, and especially the FILING TIP.
Unplug Revit™ before cleaning.
Use a dry, clean cloth to gently wipe the Revit™ outer shell.
In order to clean inside the TIP, separate it from the device by holding the GRIP and carefully detaching it from
the FRONT COVER CONE. The TIP is now ready for cleaning.
The FILING TIP can be cleaned with warm water and mild soap, using a soft brush. Dry thoroughly.
Reattach the TIP by pushing the GRIP back gently onto the FRONT COVER CONE until they are seamlessly alighned
11.2 Replacing the Tip
If you wish to treat your skin with a finer or coarser tip than the one currently in use, you can replace it by following
these simple instructions:
Separate current Tip from the device by holding its GRIP and carefully detaching it from the FRONT
COVER CONE.
Attach the TIP you chose by pushing its GRIP back gently onto the FRONT COVER CONE until they are
seamlessly aligned.
You are now ready to use the device with the tip of your choice
10. After treating with Revit™
When a Revit™ session has been completed, turn Revit™ o by giving the ON BUTTON one quick press if you
are on Full Suction Mode, or two quick presses if you are treating on Partial Suction Mode
Unplug the power cord from the electrical outlet.
It is recommended that you inspect the REPLACABLE FILTER every few treatments for skin fallout blockage. It
is also important that you clean the FILING TIP periodically.
After cleaning, it is recommended you store your Revit™ device in its original box, and keep it away from water
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn ReVit Microdermabrasion Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn ReVit Microdermabrasion Device in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info