685072

Silkn ReVit Microdermabrasion Device Manual

11
Zoom out
Zoom in
Previous page
1/12
Next page
9
English
12. Troubleshooting
“My Revit™ does not start.”
Make sure the power cord is properly connected to the Revit™ device.
Make sure the power cord is plugged into an electrical outlet on the wall.
“The suction is weak”
Make sure you have good contact with the skin and that the treatment surface is evenly and firmly pressed
to the skin.
Make sure you are on FULL SUCTION mode. To check this, give the ON BUTTON a quick press. If suction
increases, you were working on PARTIAL SUCTION mode.
Make sure your fingers are not blocking the AIR VENTS. Without air going into the system, the suction
becomes slow and inocient.
Make sure the REPLACABLE FILTER is positioned correctly inside the FRONT COVER CONE.
Make sure the REPLACABLE FILTER is not clogged by skin particles fallout. If this is the case, replace the
filter with a new one as explained in section 11.3
11.3 Replacing the filter
In order to replace the filter, hold the GRIP carefully detaching it from the FRONT COVER CONE. Remove the
Filter gently from its place inside the FRONT COVER CONE and dispose of it. Take a new one from the pack
and place it carfully inside the CONE.
Reattach the TIP by pushing the GRIP back gently onto the FRONT COVER CONE until they are
seamlessly alighned
Never immerse Revit™ or any of its parts in water!
This device is to be orderly disposed of when reaching End of Life stage. In this way the device’s valuable materials
are recycled and the environmental burden avoided.
Deliver your old equipment to the nearest electronic waste collection point for safe and ecient disposal.
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn ReVit Microdermabrasion Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn ReVit Microdermabrasion Device in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info