685072
8
Zoom out
Zoom in
Previous page
1/12
Next page
6
English
Revit™ should never be left unattended when plugged into an outlet.
Do not operate Revit™ if it has a damaged cord or plug and keep the power cord away from heated surfaces.
Do not use Revit™ if you see or smell smoke when it is in use.
Do not use Revit™ if any or all vents in its GRIP are blocked.
Do not use Revit™ if any of its part are cracked, broken, or coming apart
Unplug Revit™ before cleaning.
Do not use Revit™ with any attachments or accessories not recommended by Home Skinovations Ltd.
Revit™ must be operated only with its designated adaptor
Do not insert foreign objects into the Revit™ device!
8.1 Revit™ Setup
Remove the Revit™ exfoliation device, and other components from box.
Choose the Filing Tip you require: Coarse - for heavy duty exfoliating, Medium – for a gentler treatment, or
Fine for delicate finishing. For further instructions on how to replace the TIP please refer to section 11.2
Plug the power cord into the Revit™ Device socket.
Plug the other end of the power cord into an electrical outlet.
Your Revit™ is now ready to start.
8.2 Treating with Revit™ for the first time
The skin should be clean, dry and free of any powders, antiperspirants or deodorants.
1. Give the ON BUTTON one short press. The device is now on Partial Suction Mode and is ready for use.
2. Hold the device firmly from its GRIP area, making sure your hand does not block the AIR VENTS.
3. If you wish to increase the suction intensity level, press once on the ON BUTTON to increase the level from
Partial to Full Suction Mode.
4. Apply the FILING TIP to the skin, making sure the skin is spread evenly and smoothly and the TIP is in full
contact with the skin.
8. How To Use Revit™
Note: it is highly reccomended to start treatment with the Fine grained tip!
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn ReVit Microdermabrasion Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn ReVit Microdermabrasion Device in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info