Manual Siemens WM16W790 - iQ700 sensoFresh (page 49 of 56) (English)

630102

Zoom out

Zoom in

1/56

Faults and what to do about them. en

Water remaining in the

care product

compartment i .

■ Not a fault – the effectiveness of the care product is not affected.

■ Clean the insert if necessary.

Odours in the washing

machine.

Run the Drum Clean î or Cottons 90 °C programme without laundry.

Add standard washing powder or a detergent that contains bleach.

Note: . To prevent foaming, only use half the amount of detergent

recommended by the detergent manufacturer. Do not use detergents intended

for woollens or delicates.

The o symbol is lit on the

display panel. Foam may

also be leaking from the

detergent drawer.

Have you used too much detergent?

Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into

compartment II (not suitable for outdoor clothing, sportswear or items made

with down).

Use less detergent for the next wash cycle.

Loud noises, vibrations

and machine “wandering”

during the spin cycle.

■ Is the appliance level? Level the appliance. ~ Page 20

■ Are the appliance's feet secured? Secure the appliance's feet. ~ Page 20

■ Have the transportation securing means been removed? Remove the

transportation securing means. ~ Page 16

The display panel/

indicator lights do not

work while the appliance

is running.

■ Has there been a power failure?

■ Have the fuses blown/has the circuit breaker tripped? Switch on the circuit

breaker/replace the fuses.

■ If the fault occurs repeatedly, call the after-sales service.

There are noises after the

programme starts

sensoFresh î.

Not a fault – the appliance is filled with water to create mist; operating noises

from the fan and pump can be heard when it is doing this.

Water stains on dry

laundry after the

sensoFresh î

programme.

■ Was residual water removed before laundry was added?

■ Level the appliance. The active oxygen treatment can only work properly if

the appliance is levelled correctly. ~ Page 20

Noises can be heard after

the sensoFresh î

programme.

Active oxygen leaves a specific odour on the laundry following treatment. Shake

out the laundry briefly.

Odour has not been

removed satisfactorily

after the sensoFresh î

programme.

■ The active oxygen treatment is less effective if the drum is dirty. Run the

Drum Clean î programme before using the appliance for the first time,

and regularly thereafter.

■ Have you loaded too much laundry? Do not exceed the maximum load.

■ Have you selected a high enough intensity? Select a higher intensity.

~ Page 36

■ Leave the door and detergent drawer open so that any residual water can

evaporate. ~ Page 43

There is detergent

residue on the laundry.

■ Some phosphate-free detergents contain water-insoluble residue.

■ Select Rinse or brush the laundry after washing.

Faults Cause/remedy

i am looking for the English translation of the instructions manual for the washing machine iq790 Submitted on 18-11-2021 at 17:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM16W790 - iQ700 sensoFresh in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM16W790 - iQ700 sensoFresh

Siemens WM16W790 - iQ700 sensoFresh User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens WM16W790 - iQ700 sensoFresh Manual

Product: