630102

Siemens WM16W790 - iQ700 sensoFresh Manual

48
Zoom out
Zoom in
Previous page
1/56
Next page
en Faults and what to do about them.
48
Faults and what to do about them.
Faults Cause/remedy
Water is leaking from the
machine.
■ Attach the drain hose correctly or replace it.
■ Tighten the threaded joint on the supply hose.
The appliance is not filling
with water.
Detergent is not being
dispensed.
■ Have you pressed the Ü button?
■ Is the tap turned on?
■ Could the filter be clogged? Clean the filter. ~ Page 45
■ Is the supply hose kinked or trapped?
The door will not open. ■ The safety function is activated. Have you stopped the programme?
~ Page 40
■ Is the w childproof lock activated? Deactivate it. ~ Page 39
■ Is $ selected (Rinse Stop = no final spin)? ~ Page 40
■ Can the door only be opened by the emergency release? ~ Page 46
■ When switching from a programme that uses active oxygen to one that
does not, the door will remain locked for up to 25 minutes until there is no
longer any active oxygen in the drum.
The programme will not
start.
■ Have you pressed the Ü or Ready in button?
■ Is the door closed?
■ Is the w childproof lock activated? Deactivate it. ~ Page 39
The drum briefly jerks or
judders after the
programme has started.
Not a fault – the internal motor test may cause the drum to jerk or judder briefly
when the wash programme starts.
The water is not draining. ■ Is $ selected (Rinse Stop = no final spin)? ~ Page 40
■ Clean the drain pump. ~ Page 44
■ Clean the drain pipe and/or the drain hose.
Water is not visible in the
drum.
Not a fault – the water is below the visible area.
The spin result is not
satisfactory.
Laundry wet/too damp.
■ Not a fault – the unbalanced load detection system has interrupted the spin
cycle because the laundry is unevenly distributed.
Distribute small and large items of laundry evenly in the drum.
■ Is Easy-Iron selected (depending on the model)? ~ Page 36
■ Is the selected speed too low?
The appliance restarts the
spin cycle several times.
Not a fault – the unbalanced load detection system is adjusting an imbalance.
The programme is taking
longer than usual.
■ Not a fault – the unbalanced load detection system is adjusting an
imbalance by repeatedly redistributing the laundry.
■ Not a fault – the foam detection system is on – a rinse cycle has been
activated.
The length of the
programme changes
during the wash cycle.
Not a fault – the programme sequence is optimised for the specific washing
process. This may change the length of the programme shown on the display
panel.
… 48 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-wm16w790---iq700-sensofresh

Reset search

  • i am looking for the English translation of the instructions manual for the washing machine iq790 Submitted on 18-11-2021 at 17:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WM16W790 - iQ700 sensoFresh at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM16W790 - iQ700 sensoFresh in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM16W790 - iQ700 sensoFresh

Siemens WM16W790 - iQ700 sensoFresh User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info