630096
19
Zoom out
Zoom in
Previous page
1/40
Next page
Operating the appliance en
19
Notes
To remove the laundry at the end of
the programme,deactivate the
childlock.
The childlock remains active, even
once the appliance has been
switched off.
If the appliance is switched off while
the programme is running and
childlock is activated, the
programme continues when the
appliance is switched back on.
Adding/removing laundry
After starting the programme, you can
add or remove laundry if necessary.
Touch the I button. The appliance
checks whether reloading is possible.
If the following appears on the Touch-
Display:
The symbol Œ disappears, reloading
is possible.
The symbol Œ lights up, reloading is
not possible.
To continue the programme, touch the
I button. The programme continues
automatically.
Notes
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1. Touch the I button.
2. Select another programme.
3. And touch the I button again. The
new programme starts from the
beginning.
Cancel the programme
For programmes at high temperatures:
1. Touch the I button.
2. To cool down laundry: Select
q Rinse/Spin 0.
3. And touch the I button again.
For programmes at low temperatures:
1. Touch the I button.
2. Select q Rinse/Spin 0.
3. And touch the I button again.
Programme end during rinse
hold
The I button flashes on the Touch-
Display, and the preset spin speed and
remaining programme length are
displayed for the selected programme.
Continue the programme by:
Touch the I button or
Change the spin speed (if
necessary) and then touch the I
button again.
Note: If the water only needs to be
drained, touch the I button approx.
1 minute after the programme starts,
before the spin cycle begins. Then
switch the appliance off. The
programme is interrupted and the
door lock is released. The laundry
can be removed.
Programme end
End lights up on the Touch-Display and
I and Œ diaplays are off.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WM14U640 - Avantgarde iSensoric at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM14U640 - Avantgarde iSensoric in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM14U640 - Avantgarde iSensoric

Siemens WM14U640 - Avantgarde iSensoric User Manual - German - 40 pages

Siemens WM14U640 - Avantgarde iSensoric User Manual - Dutch - 40 pages

Siemens WM14U640 - Avantgarde iSensoric User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info