Manual Siemens WM14U640 - Avantgarde iSensoric (page 21 of 40) (English)

630096

Zoom out

Zoom in

1/40

Intelligent dosing system en

Notes

■ Only use easy-pour liquid products

that the manufacturer recommends

adding to the detergent drawer.

■ Do not mix different liquid

detergents. If changing your liquid

detergent (type, manufacturer, etc.),

empty the dispenser completely and

clean it.

■ Do not use products containing

solvents, caustic agents or volatile

substances (e.g. bleach).

■ Do not mix detergent and fabric

softener.

■ Do not use products that have

expired or are highly congealed.

■ To prevent drying out, do not leave

the dispenser lids open for a long

period of time.

Filling the dispensers:

The lids of the dispensers in the

detergent drawer are marked with the

following symbols:

■ ß Standard/universal detergent

■ M Fabric softener

1. Open the detergent drawer.

2. Open the dispenser lid(s).

3. Add detergent and/or fabric

softener. Do not fill above the max.

marking.

4. Close the lid(s).

5. Slowly push the detergent drawer in

completely.

When the detergent drawer is fully

pushed in, the display Ó goes out when

the appliance is switched on.

Everyday use

Displays:

■ The display lights up if intelligent

dosage has been selected for the

dispenser.

■ The display for the adjustment

values, e.g. Y flashes if the fill level

for the dispenser is below the

minimum level when intelligent

dosing has been selected.

(De)selecting intelligent dosage and

adjusting the dosage strength:

The intelligent dosages for detergent

and fabric softener are set at the factory

for all programmes in which intelligent

dosing can be used.

You can find an overview of all possible

programme settings on the

supplementary sheet for the installation

and operating instructions.

The dosage strength has been preset to

X (lightly soiled laundry) for detergent

ß and to Y (medium level of softness)

for fabric softener M. It can be changed

individually for each programme.

In addition to intelligent dosing, washing

additives (e.g. stain remover) can be

added manually via the left-hand

compartment.

Note: The selection (on/off) and the

selected dosage strength for

ß i-Dos and M i-Dos are saved for

each programme until they are changed

again, even if the appliance is switched

off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM14U640 - Avantgarde iSensoric in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM14U640 - Avantgarde iSensoric

Siemens WM14U640 - Avantgarde iSensoric User Manual - German - 40 pages

Siemens WM14U640 - Avantgarde iSensoric User Manual - Dutch - 40 pages

Siemens WM14U640 - Avantgarde iSensoric User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens WM14U640 - Avantgarde iSensoric Manual

Product: