Manual Siemens TE501203 EQ 5 (page 12 of 126) (English, Dutch, French, Polish)

563725

Zoom out

Zoom in

1/126

3� Turn the rotary

knob (13) to position

4� Press and hold buttons

B (11) and

A (12) simultaneously for at least

5 seconds� Either “off” or “on”

lights up�

5� Press the start button (10) to select “on”�

6� Press and hold the start button (10) for

at least 5 seconds to conrm. All of the

LEDs light up briey.

7� LED D ashes and LED F lights up�

8� Place a container with a capacity

of 0�5 litres under the milk frother

outlet (6)�

9� Pull out the milk frother (6) to open it�

LED F ashes.

10� Water will now ow through the lter and

rinse it�

11� When LED

F lights up constantly,

press in the milk frother (6) to close it�

12� Empty the container�

The appliance is ready to use again�

Information: Rinsing the lter simultaneously

activates the setting for the change lter

display (= LED D ashes).

The lter is no longer effective when the

change lter display appears, or at the

latest after two months� It needs to be

replaced for reasons of hygiene and so

that there is no build-up of limescale (this

could damage the appliance)� Replacement

lters can be obtained from retailers or from

customer service (see “Accessories”)� If no

new lter is inserted, change the setting for

the lter (see “Water hardness”).

Information: You can use the lter indicator

to mark the month in which you inserted the

lter. You can also mark the month in which

you will need to replace the lter next

(at the latest after two months)�

Information: If the appliance has not been

used for a prolonged period (for example,

when you are on vacation), the existing lter

should be rinsed before the appliance is

used again� To do so, dispense a cup of hot

water and pour it away�

Settings

You can customize the settings on the

appliance�

You can make the following adjustments:

Water hardness

The water hardness setting can be adjusted

on this appliance� It is important to set

the water hardness correctly so that the

appliance can accurately indicate when it is

time to run the descale process� The factory

setting for the water hardness is 4� You can

establish the water hardness either by using

the test strip provided or by asking your local

water provider�

Dip the test strip in the water briey, shake

it gently and check the result after one

minute�

Level Water hardness

German (°dH) French (°fH)

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

If you wish to change the default degree of

water hardness, or if you have inserted a

water lter, proceed as follows:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE501203 EQ 5 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 6,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens TE501203 EQ 5 Manual

Product: