563725

Siemens TE501203 EQ 5 Manual

10
Zoom out
Zoom in
Previous page
1/126
Next page
6
en
“Coffee strength” rotary knob
This rotary knob (13) is used
to adjust the coffee strength
or select the setting for pre-
ground coffee�
h
to
g
G
Very mild
Mild
Medium
Strong
Ground coffee
“Drink selection” rotary knob
This rotary knob (14) is
used to select the required
beverage and quantity� It is
also used to change user
settings�
a
to
c
Small espresso
Espresso
Small café crème
Café crème
Large café crème
b
to
d
2 small espresso
2 espresso
2 small café crèmes
2 café crèmes
2 large café crèmes
Milk frother
Pull the milk frother (6) out to open it and
push it back in to close it�
Before using for
the rst time
General
Fill the appropriate container using only
pure, cold, uncarbonated water and only
roasted beans (preferably espresso or
coffee bean blends for fully automatic coffee
machines)� Do not use coffee beans that
have been glazed, caramelised or treated
with other additives containing sugar, since
they will block the brewing unit�
The water hardness setting can be adjusted
on this appliance� The factory setting for the
water hardness is 4� Check the hardness
of the water you use with the enclosed test
strip� If the test reveals a value other than 4,
change the setting on the appliance accord-
ingly after switching on (see “Settings”,
“Water hardness”)�
Setting up the appliance
1� Remove the protective lm.
2� Place the fully automatic espresso
machine on a at, water-resistant
surface that can take its weight�
The ventilation slots on the appliance
must not be covered�
Important: Only use the appliance in
frost-free rooms� If the appliance has been
transported or stored at temperatures below
0° C, wait at least 3 hours before operation�
3� Pull out the mains plug from the cable
compartment (20) and plug it in� Adjust
the length of the cable by pushing it
back in and pulling it out� To do this,
place the appliance with its back ush
with the edge of the work surface and
either pull the cable downwards or
push it upwards�
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TE501203 EQ 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE501203 EQ 5 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 6,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info