Manual Siemens TE501203 EQ 5 (page 11 of 126) (English, Dutch, French, Polish)

563725

Zoom out

Zoom in

1/126

4� Assemble the milk frother� Only use

the appliance when the milk frother (6)

is completely assembled and tted.

5� Lift the water tank lid (17)�

6� Remove and rinse the water tank (16)

and ll it with fresh cold water. Do not ll

above the max mark�

7� Replace the water tank (16) and push it

rmly downwards into place.

8� Close the water tank lid (17)�

9� Fill the bean container (1) with

coffee beans (for preparation using

ground coffee see “Preparation using

ground coffee”)�

10� Press the power on/off switch O / I (9) to

switch on the appliance� LED D ashes

and LED F lights up�

11� Place a container under the milk frother

outlet (6)�

12� Carefully pull out the milk frother (6)

to open it� The appliance rinses out

the milk frother (6) with water� LED F

ashes.

13� When LED F lights up constantly,

press in the milk frother (6) to close it�

The appliance heats up and rinses� Some

water will run out of the coffee outlet� When

buttons A (12), B (11) and C (10) light

up, the appliance is ready for use�

Switching off the appliance

The factory settings of the fully automatic

espresso machine are programmed for

optimal performance� The appliance

switches off automatically after a specic

time (the length of time can be adjusted,

see “Settings – Automatic switch-off”)�

Exception: The appliance switches off

without rinsing if only hot water or steam

was dispensed�

To switch the appliance off manually before

this, press the service button

A (12)� The

appliance rinses and switches off�

Note: If the appliance is being used for the

rst time, the service programme has been

run, or the appliance has not been operated

for a long period, the rst beverage will

not have the full aroma and should not be

consumed�

When the fully automatic espresso machine

is rst used, you will achieve a suitably thick

and stable “crema” only after the rst few

cups have been dispensed�

If the appliance is in use for a long period

of time, water droplets will form on the

ventilation slits� This is normal�

Water lter

Using a water lter can prevent a build-up

of limescale deposits�

A new water lter must be rinsed before it

can be used� To do this, proceed as follows:

1� Press the water lter rmly into the

empty water tank with the aid of the

measuring spoon (18)�

2� Fill the water tank (16) with water up to

the max mark�

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE501203 EQ 5 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 6,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens TE501203 EQ 5 Manual

Product: