298807
24
Zoom out
Zoom in
Previous page
1/33
Next page
23
Appendix
Gigaset E360 / SEA / A31008-M1805-Y701-1-7619 / appendix.fm / 17.03.2010
Version 4, 16.09.2005
Appendix
Symbols and typographical
conventions used
This section explains the meaning of certain
symbols and typographical conventions
that are used in this user guide.
~ Enter digits or letters.
§Menu§ The display functions currently
in the bottom display line are
shown in reverse video. Press
the relevant display key to
launch the function.
q Press the top or bottom of the
control key, e.g. when scrolling.
c / Q / P etc.
Press the illustrated key on the
handset.
External Calls / Internal Calls (example)
Select one of the menu func-
tions (External Calls or Internal
Calls) from the list and
press
§OK§.
§§Menu§ ¢Audio Settings ¢§OK§ ¢ Ringer
Melody (example)
¢ §OK§
Press
§Menu§. Select Audio Set-
tings using q and press
§OK§.
Select Ringer Melody using q
and press
§OK§.
Care
¤ Wipe the base station and handset with a
damp cloth (do not use solvent) or an
antistatic cloth.
Never use a dry cloth. This can cause static.
Contact with liquid
If the handset has come into contact with
liquid:
¤ Switch the handset off and remove the
batteries immediately.
¤ Allow the liquid to drain from the hand-
set.
¤ Pat all parts dry, then place the handset
with the battery compartment open and
the keypad facing down in a dry, warm
place for at least 72 hours (not in a
microwave, oven, etc.).
¤ Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will generally
be able to use it again.
Questions and answers
If you have any questions about using your
phone, visit us anytime at
www.gigaset.com/customercare
. The table
below contains a list of common problems
and possible solutions.
The display is blank.
1. The handset is not switched on.
¥ Press and hold the end call key a.
2. The battery is flat.
¥ Charge the battery or replace it (page 5).
The handset does not respond to a key press.
The keypad lock is activated.
¥ Press and hold the hash key
#
(page 11).
Base is flashing in the display.
1. The handset is outside the range of the base
station.
¥ Move the handset closer to the base.
2. The base station is not switched on.
¥ Check the base station mains adapter
(page 5).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e360 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e360

Siemens gigaset e360 User Manual - German - 37 pages

Siemens gigaset e360 User Manual - Dutch - 38 pages

Siemens gigaset e360 User Manual - French - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info