298807
23
Zoom out
Zoom in
Previous page
1/33
Next page
22
Operating the base station on the PABX
Gigaset E360 / SEA / A31008-M1805-Y701-1-7619 / T-NetBox_SAG-registration.fm / 17.03.2010
Version 4, 16.09.2005
Restoring the base station to
factory settings
When the settings are restored all handsets
are de-registered. Each individual setting is
restored. Only the date and time are
retained.
§Menu§ ¢Settings ¢ §OK§ ¢ Base ¢ §OK§
¢ Base Reset ¢ §OK§
Operating the base
station on the PABX
The following settings are only needed
when your PABX requires them. Please refer
to the user guide for your PABX.
Changing the dialling mode
§Menu§ ¢ LNO11 ¢ Enter dig-
its for dialling mode: Q = Dual-tone multi-
frequency dialling (DTMF); 1 =Pulse dial-
ling (PD)
¢§OK§
Switching temporarily to dual-tone
multifrequency dialling (DTMF)
If your PABX is still using pulse dialling (PD)
but tone dialling is required for a connection
(e.g. to play back the network mailbox), you
have to switch temporarily to tone dialling.
Requirement: You are currently conducting
a call or have already dialled an external
number.
Press the asterisk key P. Tone dialling is
activated for this connection only.
Setting the flash time
§Menu§ ¢ LNO12 ¢ Enter dig-
its for flash time: Q =80ms; 1 =100ms;
2 = 120 ms; I = 180 ms; 4 =250ms;
5 =300ms; L = 600 ms; M =800ms
¢ §OK§
Changing pause after line seizure
You can set the length of the pause inserted
between pressing the talk key c and send-
ing the phone number.
§Menu§ ¢ LNO1O ¢ Enter the
digits for the current pause length:
1 = 1 sec.; 2
= 3 sec.; I = 7 sec. ¢§OK§.
Changing the pause after the recall
key
§Menu§ ¢ LNO14 ¢ Enter the
digits for the current pause length: 1
= 800
ms;
2 = 1600 ms; I =3200ms ¢ §OK§
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e360 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e360

Siemens gigaset e360 User Manual - German - 37 pages

Siemens gigaset e360 User Manual - Dutch - 38 pages

Siemens gigaset e360 User Manual - French - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info