298807
22
Zoom out
Zoom in
Previous page
1/33
Next page
21
Base station settings
Gigaset E360 / SEA / A31008-M1805-Y701-1-7619 / T-NetBox_SAG-registration.fm / 17.03.2010
Version 4, 16.09.2005
Activating/deactivating advisory
tones
§Menu§ ¢Audio Settings ¢§OK§
¢ Advisory Tones ¢ §OK§ ( =on)
Setting the battery warning tone
§§Menu§ ¢Audio Settings ¢§OK§ ¢ Battery
Low
¢ §OK§ ¢ On / Off / During Call
¢ §OK§ ( =on)
The battery warning tone is activated or
deactivated or sounds during a call.
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
Requirement:
The time is set (see page 7).
§Menu§ ¢ Alarm Clock ¢ OK§
¢ Activation ¢§OK§ ( =on)
After you activate the alarm clock, the menu
for setting the wake up time opens automat-
ically.
If the alarm clock is set, the wake up time
appears with the l icon in the display.
Setting the wake up time
§Menu§ ¢Alarm Clock ¢ §OK§ ¢ Wakeup
time
¢ §OK§ ¢ Enter wake up timen
¢ §OK§
When the alarm clock rings…
Press the display key §Off§ or any key to deac-
tivate the alarm clock for 24 hours.
If you do not press any key, the alarm clock
switches off after one minute.
Restoring the handset
default settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list or the
handset's registration on the base station.
§Menu§ ¢ Settings ¢ §OK§ ¢ Handset
¢ §OK§ ¢ Reset Handset ¢ §OK§
Cancel the reset with a.
Base station settings
The base station settings are carried out
using a registered Gigaset E36 handset.
Changing the system PIN
You have to enter the system PIN when regis-
tering a handset on the base station.
You can change the base's 4-digit default
system PIN ("0000") to a 4-digit PIN known
only to yourself.
§Menu§ ¢ Settings ¢ §OK§ ¢ Base ¢§OK§
¢ System PIN ¢ §O ¢ PIN: ¢ §OK§
¢ New PIN: ¢§OK§
Should you forget the system PIN, you can
reset the base station to the original
code 0000:
Remove the mains cable from the base sta-
tion. Press and hold down the registration/
paging key (page 1)
on the base station
while you reconnect the mains cable to the
base station. Release the key after a short
while.
The base station is now reset and the system
PIN is set to 0000.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens gigaset e360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens gigaset e360 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens gigaset e360

Siemens gigaset e360 User Manual - German - 37 pages

Siemens gigaset e360 User Manual - Dutch - 38 pages

Siemens gigaset e360 User Manual - French - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info