504665

Siemens Gigaset DA710 Manual

14
Zoom out
Zoom in
Previous page
1/18
Next page
Gi
gaset
DA
710
/
en
/
A
30350-
M
213-
R
101-2-7
W
19
/
te
l
ep
h
ony.
f
m
/
19.07.2012
14 de en fr nl
1110-01
Withheld number (anonymous call)
If you activate the withheld number function, your number will not be
displayed for the person you are calling.
M ¢ CLASS ¢ Withhold number
q Select Activate / Deactivate and confirm with [.
The withheld number function is activated or deactivated.
Hotline
The network service Hotline allows a special number to be selected sim-
ply by lifting the handset, e.g. in case of emergency. This function is not
available if it is not supported by your network provider.
M ¢ CLASS ¢ Hotline
q Select Activate and confirm with [.
~ Enter target number and confirm with [.
q Select Deactivate and confirm with [.
The network service Hotline is activated or deactivated.
Call back when busy
If you make a call but the person you are calling is already on the line,
you can arrange an automatic callback as soon as the connection is free.
M ¢ CLASS ¢ Ringback
q Select Activate / Deactivate and confirm with [.
The callback is activated or deactivated.
Automatic callback
If your network provider supports automatic callback and you activate
this function, the number of the caller who called you last while your line
was busy will be dialled automatically.
M ¢ CLASS ¢ Auto recall
q Select Activate / Deactivate and confirm with [.
The automatic callback is activated or deactivated.
Network mailbox
If you use a network mailbox, the telephone display shows new incom-
ing messages. The request for the mailbox can be started via the menu.
You can also set the LED so that it lights up to indicate incoming mes-
sages (
£ page 11).
M ¢ CLASS ¢ Phonemail
The network service number is selected.
Recall key
In public telephone systems the recall key (flash) is required for the use
of various additional services; e.g. for "callback when busy".
If necessary, the flash time on your telephone must be adjusted to the
requirements of the telephone system (
£ page 14).
Setting up of dialling code
If necessary you can change the default setting for the area code for your
connection which is saved in the telephone. The number saved here is
then used to display only the number of the person calling without area
code in the call lists, provided that they have the same area code.
M ¢ Phone setup ¢ Area code
The default number is displayed.
Q...O Enter the new area code (max. 6 digits) and confirm with
[.
Operation on a PABX
Special functions/Recall key
During an external call, you can make an enquiry or forward the call. To
do this, press the recall key
H. The subsequent procedure depends
on your PABX. To set the recall key, the telephone's flash time must be set
consistently with your PABX. Please refer to the operating instructions
for your PABX.
Changing the dialling mode/flash time
The telephone supports the following dialling modes:
u Tone dialling
u Pulse dialling
Depending on your PABX, you may need to change your phone's dialling
mode or the flash time. (Default setting: Tone dialling)
Changing the dialling mode
M ¢ Phone setup ¢ Dial mode
q Select Tone or Pulse and confirm with [.
Changing the flash time
You can change the flash time if the dialling mode is set to tone dialling
(see above) (default setting 90 ms).
M ¢ Phone setup ¢ Flash time
q Select flash time, the following values are available:
90, 120, 270, 375, 600 ms and confirm with
[.
Temporary switch to tone dialling in "Pulse" position
To use functions that require tone dialling (e.g. remote control of
answering machine), you can set the telephone to tone dialling for the
duration of the call.
After the connection is established:
* Press the star key.
After the connection is terminated, the setting reverts to pulse dialling.
Setting dialling prefixes
If your phone is connected to a PABX, you may have to use a dialling pre-
fix to make external calls. You can save up to three prefixes in your tele-
phone.
If a dialling prefix is recognised during dialling, a dialling pause will auto-
matically be applied. You can adjust the time of the dialling pause if nec-
essary (
£ page 15).
M ¢ Phone setup ¢ PABX code
The current setting is displayed.
Q.... O Enter the dialling prefix (1 to 3 digits) and confirm with [.
Use the control key to switch between the dialling prefixes:
t s Press the control key up/downwards in order to jump left/
right
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-da710

Reset search

  • How do you push the end of the coiled cable into the relevant opening of the set? Submitted on 25-9-2021 at 15:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset DA710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset DA710 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset DA710

Siemens Gigaset DA710 User Manual - German - 20 pages

Siemens Gigaset DA710 User Manual - Dutch - 20 pages

Siemens Gigaset DA710 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info