504665

Siemens Gigaset DA710 Manual

13
Zoom out
Zoom in
Previous page
1/18
Next page
Gi
gaset
DA
710
/
en
/
A
30350-
M
213-
R
101-2-7
W
19
/
te
l
ep
h
ony.
f
m
/
19.07.2012
de en fr nl 13
1110-01
Direct calling (baby call)
When direct calling is activated, the stored number is dialled by pressing
any key after lifting the handset (except for the keys
A, D and
E).
Activating direct calling
M ¢ Security ¢ Direct call
Q...O Enter the direct calling number and confirm with [.
Direct calling is activated and indicated in the display.
Deactivating direct calling
M Press the menu key.
~ Enter PIN (£ page 12) and confirm with [.
Confirm the question Disable direct? with
[.
Blocking numbers
You can block phone calls to specific dialling codes (e.g. chargeable
codes), max. 3 numbers with 5 digits each.
M ¢ Security ¢ Call block
s Select Call block 1 (or 2 or 3) and confirm with [.
Q...O Enter the call block number and confirm with [.
Network services
Public telephone systems offer you – in some cases only on request – a
range of helpful, additional services (e. g. call forwarding, callback when
busy, withheld number, etc.). These services can be selected using spec-
ified key combinations, of which your network provider will notify you.
These services can be called up and activated in the telephone menu
and the corresponding key combinations can be set or adjusted if nec-
essary.
A list with predefined key combinations can be found in the Appendix
(
£ page 15).
Caller display (CLIP)
If the caller display service is activated, an incoming call is shown on the
display with the number and saved in the call list. Prerequisite: The net-
work provider supports the following service features and the number
transfer is not withheld by the caller:
u CLI (Calling Line Identification): The caller's number is transferred.
u CLIP (Calling Line Identification Presentation): The caller's number is
displayed.
You can transfer this number to the phonebook and edit it (
£ page 9).
If you have saved the local dialling code (
£ page 14), a call with the
same dialling code is automatically only displayed as the number with-
out the dialling code.
Call Divert
Call forwarding can be set up for three different conditions:
¤ All Calls (CFU, Call Forwarding Unconditional)
¤ No Answer (CFNR, Call Forwarding No Reply)
¤ When Busy (CFB, Call Forwarding Busy)
Activating call forwarding
M ¢ CLASS ¢ Call Divert
q Select Activate and confirm with [.
The conditions for call forwarding are displayed.
q Select the desired condition for call forwarding and con-
firm with
[.
The key combination for initiating call forwarding is dis-
played.
~ Enter target number and confirm with [.
The call forwarding for the selected condition is activated.
Deactivating call forwarding
M ¢ CLASS ¢ Call Divert
q Select Deactivate and confirm with [.
The conditions for call forwarding are displayed.
q Select the desired condition for call forwarding and con-
firm with
[.
The call forwarding for the selected condition is deactivated.
Other network services
Setting/changing key combinations for network services
If the preset key combinations for the network services do not match the
information from your network provider, or if no key combination is pre-
set, these can be changed or set in the corresponding network services
menu.
Your network provider will notify you of the key combinations - if
offered.
M ¢ CLASS
q Select required network service.
H Press recall key.
Q .. O, +, $
Enter key combination for the network service and con-
firm with
[.
Use the shift key
L in the position, in which you are required to enter
data.
For example: Call forwarding when busy is activated with *67* <num-
ber> #. You are required to enter data for <number>. Use the following
key combination for the configuration:
+ L M * L #
CW Signal
If the call waiting function is available from your network provider and
you activate it, an incoming call is signalled during the conversation
(
£ page 8).
M ¢ CLASS ¢ CW Signal
q Select Activate / Deactivate and confirm with [.
The signalling of an incoming call by call waiting is activated or deacti-
vated.
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-da710

Reset search

  • How do you push the end of the coiled cable into the relevant opening of the set? Submitted on 25-9-2021 at 15:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset DA710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset DA710 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset DA710

Siemens Gigaset DA710 User Manual - German - 20 pages

Siemens Gigaset DA710 User Manual - Dutch - 20 pages

Siemens Gigaset DA710 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info