504665

Siemens Gigaset DA710 Manual

16
Zoom out
Zoom in
Previous page
1/18
Next page
Gi
gaset
DA
710
/
en
/
A
30350-
M
213-
R
101-2-7
W
19
/
appen
di
x.
f
m
/
19.07.2012
16 de en fr nl
1110-01
Standard characters
The following characters can be entered using the keypad:
*) Space
The mode for text entry is changed by repeatedly pressing the shift key
L. Change between capitals (ABC), lower case (abc) and digits (123).
The mode is briefly indicated on the lower right of the display when
switching. By selecting the (123) mode, you can enter digits directly by
pressing the respective key once.
Care
Wipe the unit with a damp cloth or an antistatic cloth. Do not use
solvents or microfibre cloths. Never use a dry cloth; this can cause static.
Contact with liquid
If the device comes into contact with liquid:
1 Allow the liquid to drain from the device.
2 Pat all parts dry. Place the device (the keypad facing down) in a dry,
warm place for at least 72 hours (not in a microwave, oven etc.).
3 Do not switch on the device again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
In rare cases, contact with chemical substances can cause changes to the
telephone's exterior. Due to the wide variety of chemical products avail-
able on the market, it was not possible to test all substances.
Questions and answers
You lift the handset, but don't hear the free tone:
Lift the handset for 5 seconds, put it back in the cradle and lift it again.
You lift the handset but you hear no dialling tone:
Is the connecting lead correctly plugged into the telephone and the
telephone socket?
The dialling tone is audible but the telephone will not dial:
The connection is OK. Is the dialling mode set correctly?
The other party cannot hear you:
Mute activated?
Regular pulse noises can be heard during a call:
The connection is receiving metering pulses from the exchange, which
the telephone cannot interpret. Contact your network operator.
Protecting our environment
Our environmental statement
We at Gigaset Communications GmbH are aware of our social responsi-
bility. That is why we actively take steps to create a better world. In all
areas of our business - from product planning and production to sales
and waste of disposal - following our environmental conscience in eve-
rything we do is of utmost importance to us. Learn more about our
earth-friendly products and processes online at www.gigaset.com
.
Environmental management system
Gigaset Communications GmbH is certified according to the
international standards ISO 14001 and ISO 9001. ISO 14001
(Environment): Certified since September 2007 by TüV SÜD
Management Service GmbH. ISO 9001 (Quality): Certified
since 17/02/1994 by TüV SÜD Management Service GmbH.
Contacts
If you should encounter any problems when operating the telephone
connected to a communication system with analogue network access,
please contact the network operator responsible or your dealer.
Disposal
All electrical and electronic products should be disposed of sep-
arately from the municipal waste stream via designated collec-
tion facilities appointed by the government or the local authori-
ties.
This crossed-out wheeled bin symbol on the product means the product
is covered by the European Directive 2002/96/E. The correct disposal
and separate collection of your old appliance will help prevent potential
negative consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and electronic
equipment.
For more detailed information about disposal of your old appliance,
please contact your local council refuse centre or the original supplier of
the product.
Authorisation
This device is intended for analogue phone lines in the UK.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the
essential requirements and other relevant regulations laid down in
Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this
Internet address:
www.gigaset.com/docs
Key 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x
1 €£$¥¤
2
a b c2äáàâãç
3
d e f3ëéèê
4
g h i4ïíìî
5
jkl5
L
m n o6öñóòôõ
M
pqrs7ß
N
t u v8üúùû
O
wxyz9ÿýæøå
Q
.,?!0+-:¿¡”’;_
*
*/()<=>%
#
#@\&§
*)
!
… 16


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-da710

Reset search

  • How do you push the end of the coiled cable into the relevant opening of the set? Submitted on 25-9-2021 at 15:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset DA710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset DA710 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset DA710

Siemens Gigaset DA710 User Manual - German - 20 pages

Siemens Gigaset DA710 User Manual - Dutch - 20 pages

Siemens Gigaset DA710 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info