693647

Siemens Climatix 2 Manual

57
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
57
-
7.13. PID BOILER
This file is displayed only after entering the factory password (see chap. 5.24.). It enables to define
the speed of the power modulation during the boiler operation. The parameters of this menu can
be changed only by persons who were properly trained.
The setting of the Boiler P factor parameter is ranging from 0 – 20; the default value is 3.7.
The instructions for changing this parameter can be found in chapter 4.
The setting of the Boiler I factor parameter is ranging from 0 – 1500 s; the default value is 600 s.
The instructions for changing this parameter can be found in chapter 4.
7.14. PID VALVES
This file is displayed only after entering the factory password (see chap. 5.24.). It enables to define
the speed of position changing of the mixing valves (Y7 in the return valve, Y1 in HC1, Y5 in HC2).
The parameters of this menu can be changed only by persons who were properly trained.
The setting of the Return valve P factor parameter is ranging from -20 to +20; the default value is
5.0. If negative values are used, the direction of rotation of the mixing valve power changes.
The instructions for changing this parameter can be found in chapter 4.
The setting of the Return valve I factor parameter is ranging from 0 – 1000 s; the default value is
90 s.
The instructions for changing this parameter can be found in chapter 4.
The setting of the HC1 P factor and HC2 I factor parameters is ranging from 1 – 20; the default
value is 2.0.
The instructions for changing this parameter can be found in chapter 4.
The setting of the HC1 P factor and HC2 I factor parameters is ranging from 0 – 1000 s; the
default value is 60 s.
The instructions for changing this parameter can be found in chapter 4.
7.15. PASSWORD HANDLING
This file is displayed only after entering the factory password (see chap. 5.24.). It is used for
password changing. The parameters of this menu can be changed only by persons who were
properly trained.
8. ERROR MESSAGES OF THE CONTROL EQUIPMENT
8.1. ERRORS OF HARDWARE OF THE CONTROL EQUIPMENT AND OF THE
PERIPHERAL SENSORS
… 57 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info