693647

Siemens Climatix 2 Manual

34
Zoom out
Zoom in
Previous page
1/77
Next page
INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT
-
34
-
the course of the day. This function is active primarily during the transition periods such as spring
or autumn. It prevents the immediate reactions of the system to the outside temperature
fluctuation.
The HC1 limit comfort parameter defines the modified outside temperature (see chap. 5.8.1.) that
represents the limit for granting the permission to heat in the mode Comfort.
The parameter setting is ranging from 5 – 30°C; the default value is 18°C.
The instructions for changing this parameter can be found in chapter 4.
The HC1 limit reduce parameter defines the modified outside temperature (see chap. 5.8.1.) that
represents the limit for granting the permission to heat in the mode Reduce.
The parameter setting is ranging from 2 – 30°C; the default value is 17°C.
The instructions for changing this parameter can be found in chapter 4.
C) Summer/winter switch
If the user does not want the system to automatically switch to the summer mode according to the
development of the outside temperature, s/he can define the “summer” and “winter” modes
manually.
6.4.4. ROOM PARAMETERS HC1
After clicking on the line Room parameters HC1 it is possible to enter the menu where all
parameters related to the internal temperatures of the room HC1 can be set, which are monitored
by the room temperature sensor (e.g. room unit A6 - SIEMENS POL 822.70).
The Frost protection HC1 parameter defines the internal temperature at which the reference
room HC1 is heated at the time when according to the TSP HC1 the mode “frost protection” is
active.
The parameter setting is ranging from 4 – 19°C; the default value is 10°C.
The instructions for changing this parameter can be found in chapter 4.
The Reduce HC1 parameter defines the internal temperature at which the reference room HC1 is
heated at the time when according to the TSP HC1 the mode “reduce” is active.
The parameter setting is ranging from 10 – 21°C; the default value is 19°C.
The instructions for changing this parameter can be found in chapter 4.
The Comfort HC1 parameter defines the internal temperature at which the reference room HC1 is
heated at the time when according to the TSP HC1 the mode “comfort” is active.
The parameter setting is ranging from 19 – 35°C; the default value is 21°C.
The instructions for changing this parameter can be found in chapter 4.
The Room influence parameter defines the influence of the room HC1 temperature (expressed as
a percentage) at the expense of the outside temperature B9 on reaching the required temperature
for heating and for heating shutdown in the reference room HC1.
Room influence Control mode
0 % Only weather-compensated control.
1 – 99 % Weather-compensated control and room influence.
100 % Only room control, the outside temperature B9 is not taken
into account.
… 34 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-climatix-2

Reset search

  • salve
    chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
    grazie
    Submitted on 11-3-2022 at 12:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Climatix 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info