521718
13
Zoom out
Zoom in
Previous page
1/20
Next page
Siemens Building Technologies CM2N3204E / 1.1999
Landis & Staefa Division 13/20
Electromagnetic compatibility
Emissions to EN 50 081-1
Immunity to EN 50 082-2
conformance to
EMC directive 89/336/EWG
Low voltage directive 73/23/EWG
Product standards
Automatic electric controls
for household and similar uses EN 60 730
Miscellaneous
Reserve in the event of a power failure 48 h (typically)
Connection terminals for wires 2 x 1.5 mm
2
or
1 x 2.5 mm
2
Weight (incl. packing) 1.17 kg
G M B1 B2 B4 B9 Z GE E1 E2 E3 E4 E5 E6 E7 E8
G0 Y10 G GY20 GY30 UP UN
AZI65.1
F91 Q14 Q24 Q34 Q44
3204G01
Q13 Q33
G Operating voltage, AC 24 V (system potential)
G0 Operating voltage (system neutral)
M Measuring neutral
B1 Measuring signal from the room or extract air temperature detector (LG-Ni1000 / DC 0...10 V)
B2 Measuring signal from the supply air temperature detector (LG-Ni1000 / DC 0...10 V)
B4 Measuring signal from the outside detector (LG-Ni1000 / DC 0...10 V)
B9 Measuring signal from the frost detector (LG-Ni1000 / DC 0...10 V)
Z Measuring signal from peripheral devices (LG-Ni1000 / DC 0...10 V)
Y10 Control signal output for heating (DC 0...10 V)
Y20 Control signal output for cooling 1
)
(DC 0...10 V)
Y30 Control signal output for heat recovery (DC 0...10 V)
GE Signal voltage neutral for digital inputs E1 through E8
E1 Digital status input «Fire/smoke»
E2 Digital status input «Air flow signal»
E3 Digital status input «Overload hot water circulator or overtemperature electric heater battery»
E4 Digital status input «Overload of chiller or chilled water circulator»
E5 Digital status input «Overload fan»
E6 Digital status input, not used
E7 Digital input «Control input 1»
E8 Digital input «Closed input 2»
F91 Common fault status output (AC 24 V) with priority «A» and «b» or «A» or «b» (can be coded for
this output)
Q13/Q14 Potential-free relay contact output, to switch circulator or electric heater battery
Q13/Q24 Potential-free relay contact output for compressor, dx-cooling or chilled water circulator
1)
Q33/Q34 Potential-free relay contact output, to switch fan speed I
Q33/Q44 Potential-free relay contact output, to switch fan speed II
UP, UN Connections (2...3) for communication
Note: LG-Ni1000 detectors = L&S standard
Control signal outputs Y20 and Q13/Q24 are available at the same time
Connection diagram
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AEROGYR RWI65.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AEROGYR RWI65.02 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AEROGYR RWI65.02

Siemens AEROGYR RWI65.02 User Manual - German - 50 pages

Siemens AEROGYR RWI65.02 Usermanual and installation guide - Dutch - 73 pages

Siemens AEROGYR RWI65.02 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info