521718
12
Zoom out
Zoom in
Previous page
1/20
Next page
CM2N3204E / 1.1999 Siemens Building Technologies
12/20 Landis & Staefa Division
The controller is supplied with all control functions and parameters factory-set. Where
required, the RWI65.02 needs to be configured for various logic functions, such as
electric heating, where certain safety regulations must be observed.
The configuration can be changed with the help of the built-in DIL switches.
Values can be changed with the function buttons on the respective operating levels. Any
change is immediately saved when the acknowledge button is pressed (when the dis-
play stops flashing).
Note changed values on the reverse of the operating instructions (folded sheet).
Operating voltage AC 24 V ±20 %
Safety extra low voltage (SELV) to EN 60 730
External transformer (100 % duty) to EN 60 742
Fusing of supply line (external) 10 A max.
Frequency 50 Hz or 60 Hz
Power consumption 10 VA
Insulation class III to EN 60 730
Degree of protection
When mounted on a flat wall IP 40 to EN 60 529
When mounted in a control panel front
Casing IP 40 to EN 60 529
Base IP 20 to EN 60 529
Digital inputs E1...E8
Voltage at open input DC 20...23 V
Logic 0 <DC 1 V
Logic 1 >DC 5 V
Current at «Logic 0» 9 mA
Perm. line lengths with copper 1.5 mm
2
300 m max.
Analog inputs B1, B2, B4, B9, Z
Detectors
Passive LG-Ni1000
Active DC 0...10 V
Measuring range 50...+150 °C
Perm. line lengths with copper 1.5 mm
2
200 m max.
Analog outputs Y10, Y20, Y30
Output voltage DC 0...10 V
Output current ±1 mA max.
Max. load sustained short-circuit
Relay outputs Q13/Q14/Q24, Q33/Q34/Q44
Switching capacity, voltage AC 19 V min., 265 V max.
Switching capacity, current at AC 19 V 20 mA min., 4 A / 3 A
1)
max.
Switching capacity, current at AC 265 V 5 mA min., 4 A / 3 A
1)
max.
1) at cos ϕ = 0.6
Relay output F91
Output voltage AC 24 V
Switching capacity, current 20 mA min., 4 A / 3 A
1)
max.
Communication interface RS-485
Ambient conditions
Operation to IEC 721-3-3
Climatic conditions class 3K5
Temperature 5...+50 °C
Humidity (non-condensing) <85 % r.h.
Transport to IEC 721-3-2
Climatic conditions class 2K3
Temperature 25...+70 °C
Humidity <95 % r.h.
Mechanical conditions class 2M2
Settings
Recommendation
Technical data
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AEROGYR RWI65.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AEROGYR RWI65.02 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AEROGYR RWI65.02

Siemens AEROGYR RWI65.02 User Manual - German - 50 pages

Siemens AEROGYR RWI65.02 Usermanual and installation guide - Dutch - 73 pages

Siemens AEROGYR RWI65.02 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info