521718
11
Zoom out
Zoom in
Previous page
1/20
Next page
Siemens Building Technologies CM2N3204E / 1.1999
Landis & Staefa Division 11/20
DIL no. ON position OFF position
8 Electric heater battery
1)
Hot water heating coil
2)
7 Operating action Y10 « / » Operating action Y10 « \ »
6 Output Y30 disabled Output Y30 enabled
5 Comfort (first Y10, then Y30) Economy (first Y30, then Y10)
4 Operating action Y30 for mixing dampers Operating action Y30 for HR
systems
3
Without
MECH function
With
MECH function
2 Not used Not used
1 Test function for production Normal DDC operation
(cannot be used)
1) Fan overrun is automatically activated
2) Frost protection controller is automatically activated
Using the AZI65.1 insert, the RWI65.02 is able to communicate with an active bus user
(master, such as the VISONIK Building Process Station, BPS) via the Floor Level Net-
work (FLN) bus. The insert contains the electronic circuits required for communication.
The communication insert slides into its compartment in grooves. The compartment be-
comes accessible after opening the front door and removing the cover. Fitting the FLN
communication insert in the RWI65.02 requires no re-commissioning but only setting of
the address, which is needed for the exchange of data in the network.
For more information, please refer to data sheet CM2N3206E, «FLN Communication
Insert».
80 % of the plastic materials used can be recycled. The controller has a super capacitor
in place of NiCd batteries which need to be replaced every two years - to enhance
operating safety and environmental protection.
The operating voltage required for the controller is AC 24 V. The transformer used must
be suitable for safety extra low voltage (SELV), 100 % duty, and must have separate
windings.
Fuses, switches, wiring and earthing must be in compliance with the local safety regula-
tions.
The limitations cannot be used as safety functions. These always require separate
safety devices.
All important variables that are required for commissioning - if known at the time of
planning - are to be shown on the plant documentation (connection diagram, etc.).
For additional information on the RWI65.02, please refer to the Reference Manual, or-
dering no. CM2Z3204E. It contains application examples, detailed function descriptions,
a data point list for commissioning, notes on safety, and so on.
The controller is designed for wall mounting (in an open space or inside a control panel)
or flush panel mounting (control panel front, console, etc.). The permissible ambient
conditions must be observed. First, the base is to be mounted and wired up. The cables
inside the base must be accommodated such that the insert can be easily fitted.
Secure fixing screws only after commissioning. The controller is supplied complete with
mounting instructions.
For commissioning, the Reference Manual, ordering no. CM2Z3204E, is required.
When commissioning the plant, all functions of the controller and of the communication
insert (if present) and the wiring of the connected units must be checked.
FLN communication
insert AZI65.1
Recyclability, environ-
mental protection, oper-
ating safety
Engineering notes
Fitting notes
Commissioning
notes
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AEROGYR RWI65.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AEROGYR RWI65.02 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AEROGYR RWI65.02

Siemens AEROGYR RWI65.02 User Manual - German - 50 pages

Siemens AEROGYR RWI65.02 Usermanual and installation guide - Dutch - 73 pages

Siemens AEROGYR RWI65.02 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info