16
BASIC PLAYBACK
Operations
Before operation, enter the standby mode.
1
• The STANDBY indicator lights up in amber. This means
that the unit is connected to the AC mains and a small
amount of current is retained to support operational
readiness.
• To turn the power completely off, press the POWER
switch again.
• Press the POWER ON button, then the unit is turned on
to enter the operating mode and the STANDBY indicator
lights up in blue.
• In the operating mode, to enter the standby mode, press
the STANDBY button.
• 8 cm (3 inch) discs can be loaded on the inside circle of
the tray, too.
• When a DVD that doesn’t contain any menu is loaded,
playback automatically starts.
In the standby mode, turn the power on.
2
Open the disc tray to load a disc with the printed side up,
then close it.
3
Notes :
• In case of DVD Audios, when the DVD Audio to be played contains not only DVD Audio content but also DVD Video content,
first be sure to set the DVD AUDIO AREA correctly before playback.(For details, refer to “When selecting the DVD AUDIO
AREA” on page 43.)
• In case of SACDs, when the SACD to be played contains 2 channel and multichannel audio areas, and CD layer, first be sure
to select the preferred area/layer before playback.(For details, refer to “To select a playback area/layer” on page 18.)
• In case of DivX discs, this unit provides you the DivX
®
VOD(Video On Demand) registration code that allows you to rent and
purchase videos from DivX
®
VOD service at www.divx.com/vod.
If necessary, you can confirm the registration code of your unit. (For details, refer to “When selecting the DIVX VOD” on page
50.)
• Depending on the disc types, it may take times to read the loaded disc.
Before starting playback
• Make the initial settings to suit your usage conditions the very first time this unit is turned on.(For details, refer to “Initial
Settings” on page 32)
• For explanation purposes, this instructions explains the OSD(On-Screen Display) language displayed on TV in English.
• Usable discs for each operation/ function are referred to by the icons;
Preparations
• Turn on the TV and select the video input source connected to the unit.
• When you want to enjoy the sound of disc from the audio system, turn on the audio system and select the input source
connected to the unit.